F302i
Floorstanding two-way, rear-ported speaker pair with a 150mm multi-fibre bass/mid driver and a 25mm titanium dome tweeter. It is an updated version of the F302 with a revised tweeter and crossover, aimed at hi-fi and home theatre listeners.
- 2-way, rear-ported floorstanding speaker, sold as a pair
- 150mm multi-fibre bass/mid driver with 25mm titanium dome tweeter
- Sensitivity 90dB, 8 ohm nominal impedance
- Frequency response 36Hz-34kHz (-6dB typical in room)
- Recommended amplifier power 40-180W RMS
- Magnetic grilles store on the rear of the cabinet
Fotografije
7Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao F302i, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The F302i is a floorstanding loudspeaker sold as a pair. It uses a two-way, rear-ported design with a 150mm multi-fibre bass/mid driver and a 25mm titanium dome tweeter, crossing over at 3.2kHz. Compared with the earlier F302, it has an upgraded tweeter and a revised crossover, which extends the high frequencies and gives a more detailed treble.
The cabinet measures 932 x 233 x 308mm and weighs 13.3kg each. Sensitivity is 90dB (2.83V at 1m) with an 8 ohm nominal impedance, and the speaker is rated for 60W RMS continuous power, with a recommended amplifier range of 40 to 180W RMS. In-room frequency response is given as 36Hz to 34kHz (-6dB).
Magnetic grilles can be stored on the rear of the cabinet while listening, a feature carried over from the F500 Series. The speaker is offered in Black Ash, Light Oak and Walnut finishes and suits both stereo hi-fi systems and home theatre setups. It is part of the F300i Series.
Videozapis
Specifikacije
- Marka
- Fyne Audio
- Model
- F302i
- Kategorija
- Hi-Fi i kućni audio › Zvučnici
Audio
- System type
- 2 way, rear ported
- Drive unit complement
- 1 x 150mm multi-fibre bass / mid, 1 x 25mm titanium dome tweeter
- Frequency response (-6dB typical in room)
- 36Hz-34kHz
- Sensitivity (2.83 Volt @ 1m)
- 90dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 3.2kHz
- Crossover type
- 2nd order low pass, 3rd order high pass
Power
- Recommended amplifier power (Watt RMS)
- 40 - 180
- Continuous power handling (Watt RMS)
- 60
Physical
- Dimensions (H x W x D)
- 932 x 233 x 308mm (36.7 x 9.2 x 12.1")
- Net weight (each)
- 13.3kg (29.3lb)
- Finishes
- Walnut / Black Ash / Light Oak
- Dimensions include
- Grille, terminals and plinth; excludes spikes
General
- SKU
- F8000052
- Series
- F300i Series
- Sold as
- Per pair
- Grille storage
- Magnetic, on rear of cabinet