F300LCR
A compact on-wall loudspeaker with two 125mm mid/bass drivers and a 25mm tweeter, from the F300 series. It suits budget home cinema installs as a centre, left/right or surround speaker.
- Compact on-wall speaker for centre, stereo or surround use
- 2 x 125mm multi-fibre bass/mid drivers plus 25mm polyester tweeter
- D'Apolitto driver layout, 2-way closed box
- 90dB sensitivity, 8 Ohm nominal impedance
- Frequency response 80Hz - 28kHz (-6dB, in room)
- Listed as discontinued; sold as a single unit
Myndir
8Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur F300LCR birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The F300LCR is a slim wall-mounted speaker derived from the F300C centre channel. Its cabinet is shallower than the original, so it sits closer to the wall. It can be used as a stereo speaker, a centre channel or a surround speaker.
Two 125mm multi-fibre bass/mid drivers flank a 25mm polyester dome tweeter in a D'Apolitto arrangement, which is intended to give a wide sound stage. It is a 2-way closed-box design with a 3.4kHz crossover and 90dB sensitivity, with a 50W RMS continuous power rating and 25 to 100W RMS recommended amplifier power. Frequency response is quoted as 80Hz to 28kHz (-6dB, typical in room), so it is intended to be used with a subwoofer.
The speaker is sold as a single unit and comes in Black Ash, Light Oak or Walnut finishes. A wall mounting template and the F300 series manual are available as downloads. The product is listed under the Discontinued category.
Tækniupplýsingar
- Framleiðandi
- Fyne Audio
- Líkan
- F300LCR
- Flokkur
- Hi-Fi og heimilishljóð › Hátalarar
Audio
- System type
- 2 way, closed box
- Sensitivity (2.83 Volt @ 1m)
- 90dB
- Nominal impedance
- 8 Ohm
- Frequency response (-6dB typical in room)
- 80Hz - 28kHz
- Crossover frequency
- 3.4kHz
- Crossover type
- 2nd order low pass, 1st order high pass
Drivers
- Drive unit complement
- 2 x 125mm multi-fibre bass / mid. 1 x 25 mm polyester dome tweeter
- Tweeter
- 25mm polyester dome
- Bass / mid driver
- 2 x 125mm multi-fibre
Power
- Recommended amplifier power (Watt RMS)
- 25- 100
- Continuous power handling (Watt RMS)
- 50
Physical
- Dimensions (H x W x D)
- 156 x 400 x 120mm (6.1 x 15.8 x 4.7")
- Net weight (each)
- 4.4kg (9.7lbs)
- Finishes
- Walnut / Black Ash / Light Oak
- SKU
- F8000008
In the box
- Supplied quantity
- Single unit
- Downloads
- F300 Series Manual, F300LCR Wall Mounting Template