F300
The F300 is a compact two-way, rear-ported bookshelf speaker for stereo hi-fi or home theatre use. A wall-mount bracket is pre-fitted to the rear panel, which suits tight spaces or use as a rear effects speaker. It is listed by the maker as discontinued.
- 2-way, rear-ported bookshelf speaker
- 125mm multi-fibre bass/mid and 25mm polyester dome tweeter
- Pre-fitted rear bracket for flush wall mounting
- 87dB sensitivity, 8 ohm nominal impedance
- Suits 20-70W RMS amplifiers
- Walnut, Black Ash or Light Oak finish
Ritratti
8Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ F300, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The F300 is a two-way bookshelf speaker with a rear port. It pairs a 125mm multi-fibre bass/mid driver with a 25mm polyester dome tweeter, crossed over at 3.4kHz using a 2nd order low-pass and 3rd order high-pass network. Quoted in-room response is 54Hz to 28kHz (-6dB), with 87dB sensitivity and an 8 ohm nominal impedance.
A bracket is already fitted to the back of the cabinet, so the speaker can be mounted flush against a wall. This helps where shelf or floor space is limited, and it suits the speaker for rear effects duty in a home cinema system. It can equally serve as the main pair in a two-channel hi-fi system.
The maker recommends amplifier power of 20 to 70 watts RMS, and continuous power handling is 35 watts RMS. The cabinet measures 250 x 156 x 211mm and weighs 3.7kg each. Finishes are Walnut, Black Ash and Light Oak. The model sits in the F300 Series and is sold as a pair.
Vidjo
Speċifikazzjonijiet
- Marka
- Fyne Audio
- Mudell
- F300
- Kategorija
- Hi-Fi u awdjo tad-dar › Speakers
Audio
- System type
- 2 way, rear ported
- Drive unit complement
- 1 x 125mm multi-fibre bass/mid, 1 x 25mm polyester dome tweeter
- Frequency response (-6dB typical in room)
- 54Hz - 28kHz
- Sensitivity (2.83 Volt @ 1m)
- 87dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 3.4kHz
- Crossover type
- 2nd order low pass, 3rd order high pass
Power
- Recommended amplifier power
- 20 - 70 Watt RMS
- Continuous power handling
- 35 Watt RMS
Physical
- Dimensions (H x W x D)
- 250 x 156 x 211mm (9.8 x 6.1 x 8.3")
- Net weight (each)
- 3.7kg (8.2lb)
- Finishes
- Walnut / Black Ash / Light Oak
- Wall mounting
- Bracket pre-fitted to rear panel
- Sold as
- Per pair
General
- Series
- F300 Series
- SKU
- F8000003
- Status
- Discontinued