F1-10
The F1-10 is a two-way floorstanding loudspeaker with a 250mm (10") point source driver and a 75mm titanium dome compression tweeter. It is a high-sensitivity design aimed at audiophiles who want to pair it with anything from low-power valve amplifiers to high-power solid state amps.
- 250mm IsoFlare point source driver with 75mm titanium tweeter
- Sensitivity 94dB (2.83V @ 1m), 8 ohm nominal
- Frequency response 28Hz - 26kHz (-6dB, in room)
- Twin cavity BassTrax ported cabinet, downwards firing port
- HF energy and presence controls, +/-3dB each
- Recommended amplifier power 20 - 280W RMS
Zdjęcia
6Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi F1-10, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The F1-10 is a floorstanding speaker built around a 250mm (10") IsoFlare point source driver with a multi-fibre bass/midrange cone. A 75mm titanium dome compression tweeter sits at its centre, and the pair is crossed over at 750Hz. In-room response is quoted as 28Hz to 26kHz, and sensitivity is 94dB, so the speaker can be driven by a wide range of amplifiers.
The cabinet uses a twin cavity BassTrax ported design, with the port firing downwards into a Tractrix diffuser. Two potentiometer controls adjust the output: high frequency energy (750Hz to 26kHz) and presence (2.5kHz to 5.0kHz), each by +/-3dB. They let the speaker be tuned to the room size and placement. The crossover is a bi-wired passive low-loss design, second order low pass and high pass, and it has been deep cryogenically treated.
The speaker is finished in lacquered burr walnut with a plinth top. It is a heavy cabinet at 57.7kg each. Connection is through bi-wire terminals to an amplifier rated between 20 and 280 watts RMS. The product is listed under the maker's Discontinued category.
Wideo
Specyfikacja
- Marka
- Fyne Audio
- Model
- F1-10
- Kategoria
- Hi-Fi i audio domowe › Głośniki
Audio
- System type
- 2 way, downwards firing port with BassTrax Tractrix diffuser
- Frequency response (-6dB typical in room)
- 28Hz - 26kHz
- Sensitivity (2.83 Volt @ 1m)
- 94dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 750Hz
- Crossover type
- Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated
- System adjustments
- High frequency energy (750Hz - 26kHz) +/-3dB; Presence (2.5kHz - 5.0kHz) +/- 3dB
Drivers
- Drive unit complement
- 1 x 250mm IsoFlare point source driver, multi-fibre bass / midrange cone, with 75mm titanium dome compression tweeter, neodymium magnet system
- Woofer / midrange size
- 250mm (10")
- Tweeter size
- 75mm titanium dome compression
Power
- Recommended amplifier power (Watt RMS)
- 20 - 280
- Continuous power handling (Watt RMS)
- 140
Physical
- Dimensions - HxWxD
- 1191 x 405 x 581mm (46.9 x 15.9 x 22.9")
- Net weight - each
- 57.7kg
- Finishes
- Piano Gloss Walnut
- Sold as
- Per pair
In the box
- Manual
- F1-10 and F1-12 Manual (download)
- SKU
- F8000000