Clarett OctoPre
Eight-channel microphone preamp and ADAT converter that adds eight analogue inputs and eight analogue outputs to any interface with ADAT optical ports. Aimed at home and project studios expanding their channel count.
- 8 Air-enabled mic preamps with 57 dB gain range
- ADAT optical in and out, up to 192 kHz sample rate
- Two front-panel instrument inputs with extra headroom
- Switched insert point with relay bypass on every channel
- 8 balanced analogue outputs on 25-pin D-sub
- Three-year manufacturer warranty
Zdjęcia
7Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi Clarett OctoPre, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The unit combines eight mic preamps with 24-bit AD/DA conversion and passes audio over ADAT optical. Each preamp offers up to 57 dB of gain and can switch in an Air mode that imitates the input impedance and frequency response of the maker's ISA mic preamp. Converters work at sample rates from 44.1 kHz up to 192 kHz.
Two instrument inputs sit on the front panel with extra headroom, while the rear panel carries combo XLR/jack connectors that switch automatically between mic and line level. Every channel has a switched insert point with a relay bypass, so outboard compressors, equalisers or a patchbay can stay connected and be engaged with a button press.
On the output side, up to eight ADAT channels feed balanced analogue outputs on a 25-pin D-sub connector, which makes the unit useful for mixing as well as tracking. The line outputs can optionally carry a feed from the mic preamps, for example to send signal to a live console while the digital outputs are being recorded. A power supply is included, along with a software bundle.
Wideo
Specyfikacja
- Marka
- Focusrite
- Model
- Clarett OctoPre
- Kategoria
- Studio › Interfejsy audio
Audio
- Supported sample rates
- 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
- Converter resolution
- 24-bit
- Dynamic range A-D
- up to 118 dB
- Dynamic range D-A
- up to 119 dB
Microphone inputs
- Frequency response
- 20 Hz - 35 kHz ±0.1 dB
- Dynamic range (without insert)
- 118 dB (A-weighted)
- Dynamic range (with insert)
- 115 dB (A-weighted)
- THD+N
- 0.001%
- Noise EIN
- –128 dBu (A-weighted)
- Maximum input level
- +18 dBu ±0.5 dB
- Gain range
- 57 dB
Line inputs
- Frequency response
- 20 Hz - 35 kHz ±0.1 dB
- Dynamic range (without insert)
- 117 dB (A-weighted)
- Dynamic range (with insert)
- 115 dB (A-weighted)
- THD+N
- 0.001%
- Maximum input level
- +26 dBu ±0.5 dB
- Gain range
- 57 dB
Instrument inputs
- Frequency response
- 20 Hz - 35 kHz ±0.1 dB
- Dynamic range (without insert)
- 116 dB (A-weighted)
- Dynamic range (with insert)
- 114 dB (A-weighted)
- THD+N
- 0.001%
- Maximum input level
- +14 dBu ±0.5 dB
- Gain range
- 57 dB
Line outputs
- Dynamic range
- 118 dB (A-weighted)
- Maximum output level (0 dBFS)
- +16 dBu, balanced
- THD+N
- 0.0007%
- Output connector
- 25-pin D-sub
In the box
- Included
- Clarett OctoPre, power supply
- Software
- Focusrite Red plug-in suite, Softube Time and Tone Bundle, Plug-in Collective
- Not included
- ADAT cable
- Warranty
- Three years