Stereo Pulsar
The Stereo Pulsar is an analog tremolo and panning pedal with stereo outputs, a switchable triangle or square wave and a Shape control that bends the waveform. It suits guitarists who want vintage tremolo or stereo panning across two amps. The maker discontinued it in 2025.
- Analog tremolo and panning with stereo outputs
- Triangle or square wave via Shape switch
- Shape knob blends sawtooth directions or pulse width
- Buffered bypass
- 9V battery included; optional 9.6VDC-200mA adapter
- Discontinued in 2025; first released in 2007
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine Stereo Pulsar, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
The Stereo Pulsar is an analog tremolo pedal that can also pan its signal between two amplifiers. A Shape switch selects a triangle or square modulation wave. The Shape knob then moves the waveform from a negative to a positive sawtooth, or changes the pulse width, so the pedal covers classic tremolo as well as less conventional rhythmic patterns.
Depth sets how much tremolo is applied, Rate sets the speed of the tremolo or pan, and a footswitch turns the effect on and off. The status LED blinks in time with the modulation while the effect is engaged. The pedal uses buffered bypass and a die-cast chassis, and it first appeared in 2007.
The input and both outputs are 1/4" mono jacks. The Main Out goes to one amplifier and the Stereo Out to a second amplifier for stereo or panning setups. Power comes from a supplied 9V battery, or from an optional 9.6VDC 200mA adapter that is sold separately.
Físeán
Sonraíochtaí
- Branda
- Electro-Harmonix
- Samhail
- Stereo Pulsar
- Catagóir
- Éifeachtaí agus pedail
Controls
- Depth knob
- Adjusts the amount of tremolo applied to the signal
- Rate knob
- Adjusts the speed of the tremolo or pan effect
- Shape knob
- Changes the shape of the modulating waveform
- Shape switch
- Selects Triangle Wave or Square Wave mode
- Footswitch
- Engages/disengages the effect
- Rate/status LED
- Blinks at the modulation rate when the effect is engaged
Inputs
- Input jack
- 1/4" mono
Outputs
- Main out jack
- 1/4" mono, to amplifier input
- Stereo out jack
- 1/4" mono, to second amplifier input
- Audio
- Stereo
Audio
- Circuit
- Analog
- Bypass
- Buffered Bypass
Power
- Power supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current draw
- 17mA
Physical
- Dimensions (in)
- 4.75 x 4 x 2.25
- Chassis
- Tough and compact die-cast chassis
General
- Year released
- 2007
- Status
- Discontinued 2025
- UPC
- 683274010595