Stereo Electric Mistress
Digital stereo flanger and chorus pedal in a die-cast chassis, with separate flanger and chorus depth controls that can be used together. Suited to guitarists who want flanging, chorus or both in stereo, live or in the studio.
- Digital flanger and chorus in one pedal
- Flanger and chorus can be used together
- Independent Main and Stereo outputs
- Filter Matrix mode for manual flanger sweep
- Buffered bypass
- 9.6VDC adapter included, 160mA draw
Myndir
8Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur Stereo Electric Mistress birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The Stereo Electric Mistress combines a flanger and a chorus in one digital pedal. Each effect has its own depth knob and the two can run at the same time. A shared rate knob sets the speed of the modulation for both. A Filter Matrix mode lets the player sweep the flanger by hand, or pick a fixed flange point to hold a static tonality.
The pedal has a mono input and two outputs, Main Out and Stereo Out, which are independent so the effect can be sent to two amps or two channels. A footswitch toggles the effect and a status LED lights when the effect is engaged. Bypass is buffered.
The unit is powered from the included 9.6VDC adapter, drawing 160mA. The chassis is die-cast and compact, measuring 4.75 x 4 x 2.25 inches. It was first released in 2007.
Myndband
Tækniupplýsingar
- Framleiðandi
- Electro-Harmonix
- Líkan
- Stereo Electric Mistress
- Flokkur
- Effektar og pedalar
Audio
- Circuit
- Digital
- Audio
- Stereo
- Bypass
- Buffered Bypass
Controls
- Rate knob
- Sets LFO speed for the flanger and the chorus
- Flanger depth knob
- Sets the amount of flange mixed with the direct signal
- Chorus depth knob
- Sets the amount of chorus
- Footswitch
- Effect on/off with status LED
- Filter Matrix mode
- Manual flanger sweep or fixed flange point
Inputs
- Input jack
- 1/4" audio input
Outputs
- Main out jack
- 1/4" main effect output
- Stereo out jack
- 1/4" stereo effect output
Power
- Power supply
- 9.6VDC-200mA power adapter included
- Current draw
- 160mA
Physical
- Dimensions (in)
- 4.75 x 4 x 2.25
- Chassis
- Die-cast
In the box
- Power adapter
- Included
- Owner's manual
- Available to download