Spruce Goose
Analog overdrive pedal based on a Bluesbreaker-style circuit, with a three-position LIFT input-gain switch and an active bass control. Aimed at guitarists wanting amp-like breakup from light crunch to saturated lead, plus a momentary boost option.
- Bluesbreaker-inspired analog overdrive
- 3-position LIFT switch: 0, 9 dB or 21 dB input gain
- Active BASS knob, flat at noon, plus TREBLE, GAIN and VOL
- Relay true bypass with latching and momentary footswitch action
- Runs on 9V battery (included) or optional center-negative supply
- Draws 20mA
Billeder
7Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en Spruce Goose, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The Spruce Goose is a mono analog overdrive built around a Marshall Bluesbreaker-inspired circuit. It aims for natural, amp-like breakup that keeps dynamics and clarity, with an output range extended beyond the original design.
A three-position LIFT switch sets how much gain is applied ahead of the drive stage: none in the low position, 9 dB in the middle and 21 dB in the high position. GAIN sets the amount of drive, VOL sets output level, and tone is shaped by a TREBLE knob and an active BASS knob that is flat at noon and boosts or cuts low end either side of it. The bass control can add weight to single-coil guitars or tighten warmer humbuckers.
Switching is true bypass using a mechanical relay. A tap on the footswitch latches the effect on and off, while holding it for more than half a second gives momentary engagement; the momentary action can be disabled. The pedal runs on an included 9V battery or an optional center-negative power supply, and has a mono input and output jack.
Video
Specifikationer
- Mærke
- Electro-Harmonix
- Model
- Spruce Goose
- Kategori
- Effekter og pedaler
Audio
- Circuit
- Analog
- Audio
- Mono
- Bypass
- True Bypass
- LIFT low position
- No additional gain
- LIFT mid position
- 9dB of gain
- LIFT high position
- 21dB of gain
Controls
- Knobs
- VOL, GAIN, TREBLE, BASS (active)
- Switches
- 3-position LIFT switch
- Footswitch
- Soft footswitch, latching and momentary action
- Status indicator
- LED lit when engaged
Inputs
- Input jack impedance
- 680kΩ
Outputs
- Output jack impedance
- 550Ω
Power
- Power supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current draw
- 20mA
- Power jack
- 9VDC, center-negative; do not exceed 12VDC
Physical
- Dimensions (in)
- 4.5 x 2.75 x 2.1
In the box
- Battery
- 9V battery included