OD Glove
A compact analog MOSFET overdrive and distortion pedal for guitar, covering clean boost through crunch to high-gain saturation. It suits players who want a versatile single-box drive with voicing and voltage options.
- Analog MOSFET overdrive/distortion circuit
- Tone Shift switch changes mid-frequency emphasis
- Selectable 9V or 18V internal voltage
- True bypass with LED status indicator
- Die-cast chassis, 4.5 x 2.75 x 2.1 in
- 9V battery included; draws 12mA
Zdjęcia
8Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi OD Glove, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The OD Glove is an analog overdrive/distortion stompbox built around a MOSFET circuit. Its controls cover a wide range, from a clean, sparkling boost through crunchy breakup to thick, saturated high-gain tones, while keeping the sound articulate rather than muddy.
Three knobs set the sound: Vol for output level, Gain for input gain and overdrive amount, and Tone, which rolls off high frequencies for a smoother or less harsh response. A Tone Shift switch changes which mid frequencies the Tone knob emphasizes. The internal operating voltage can be set to either 9V or 18V to alter the character of the drive.
The pedal is mono, with a quarter-inch input jack and a quarter-inch Amp output jack. The footswitch engages the effect, shown by an LED, and the true-bypass design leaves the signal untouched when it is off. It is housed in a die-cast chassis, runs from a supplied 9V battery, and can alternatively use an optional 9.6VDC-200mA adapter sold separately.
Wideo
Specyfikacja
- Marka
- Electro-Harmonix
- Model
- OD Glove
- Kategoria
- Efekty i kostki
Controls
- Vol knob
- Sets the output level
- Gain knob
- Controls the amount of input gain and overdrive
- Tone knob
- Filters out high frequencies
- Tone Shift switch
- Controls the mid-frequency emphasis of the Tone knob
- Footswitch and LED
- Engages the effect or selects bypass; LED lit when engaged
Audio
- Circuit
- Analog
- Audio
- Mono
- Bypass
- True Bypass
- Internal voltage
- Selectable 9V or 18V
Connectivity
- Input jack
- ¼" audio input
- Amp jack
- ¼" audio output
Power
- Power supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current draw
- 12mA
Physical
- Dimensions
- 4.5 x 2.75 x 2.1 in
- Chassis
- Die-cast, compact
In the box
- Battery
- 9V battery included