Oceans 11
Compact digital reverb pedal with 11 reverb types, including hall, spring, plate, reverse, shimmer and polyphonic pitch-shifted modes. Aimed at guitarists who want a wide range of spatial effects on a small pedalboard or in the studio.
- 11 reverb types: Hall, Spring, Plate, Reverse, Echo, Shimmer, Poly and more
- Secondary Knob Mode gives access to additional parameters
- Internal Tails switch: natural decay or instant cut on bypass
- Infinite reverb via footswitch hold or external footswitch
- Tap tempo for the Echo reverb type
- Buffered bypass, mono, 9.6VDC adapter included
Billeder
7Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en Oceans 11, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The Oceans 11 is a mono digital reverb pedal built around eleven selectable algorithms: Hall, Spring, Plate, Reverse, Echo, Tremolo, Modulated, Dynamic, Auto-Infinite, Shimmer and Polyphonic. A rotary type selector chooses the algorithm, and the Mode button steps through the variations within each type, such as the three tremolo shapes or the chorus, flanger and combined modulation options.
Front-panel controls cover effect level, decay time and tone. Further parameters are reached through a Secondary Knob Mode. An internal Tails switch sets whether the reverb decays naturally or cuts off when the pedal is bypassed. In most settings the pedal can also hold an infinite reverb wash that can be played over, triggered by holding the footswitch or by an external momentary footswitch. In the Echo type the footswitch doubles as tap tempo.
The pedal uses buffered bypass, has a single input, a single output and a dedicated Infinite jack, and runs from the included 9.6VDC 200mA power adapter. It was released in 2018.
Video
Specifikationer
- Mærke
- Electro-Harmonix
- Model
- Oceans 11
- Kategori
- Effekter og pedaler
Audio
- Circuit
- Digital
- Bypass
- Buffered Bypass
- Audio
- Mono
- Reverb types
- 11 (HALL, SPRING, PLATE, REVRS, ECHO, TREM, MOD, DYNA, AUTO-INF, SHIM, POLY)
Controls
- FX LVL knob
- Controls the output volume of the reverb effect
- TIME knob
- Controls the decay time of the reverb
- Reverb Type knob
- Selects the active reverb type
- TONE knob
- Controls the tone or EQ of the reverb signal
- MODE button
- Cycles through the modes of the active reverb type
- Tails switch
- Internal; natural fade-out or immediate stop on bypass
- Footswitch
- Toggles bypass and effect; hold for Infinite; tap tempo in ECHO
Inputs
- Input jack
- Audio input
Outputs
- Output jack
- Audio output
Connectivity
- Infinite jack
- ¼" jack for external momentary footswitch
Power
- Power supply
- 9.6VDC-200mA power adapter included
- Current draw
- 150mA
Physical
- Dimensions (in)
- 4.5 x 2.75 x 2.1
- Indicator
- LED shows effect status, reverb mode, tap tempo and infinite status
In the box
- Power adapter
- 9.6VDC-200mA included