
Nano Pulsar
Analog stereo tremolo and panner pedal in a compact Nano-sized enclosure, aimed at guitarists who want adjustable waveform shapes from smooth to choppy. It runs in mono or stereo and includes a Volume control to compensate for level loss.
- Analog tremolo and stereo panner
- Triangle/Square mode switch with Shape knob
- Rate range of about 20 seconds to 30 Hz
- Volume control with up to 12 dB boost
- Mono or stereo operation via two outputs
- 9V battery included; buffered bypass
Fotók
7Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy Nano Pulsar modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The Nano Pulsar is an analog tremolo and auto-panner with a Shape knob that morphs the modulating waveform. A switch selects between a triangle-based mode (rising sawtooth through triangle to falling sawtooth) and a square-based mode (narrow pulse through square to wide pulse). Rate covers roughly 20 seconds per cycle up to 30 Hz, so it can move from slow swells into ring-modulation-like sounds when Rate and Depth are pushed high.
Depth sets the amount of tremolo, with the widest dynamic range and widest stereo field at about the 1 o'clock position. Turned further, the modulation becomes asymmetric and swings the signal between positive and negative phase, giving a warped, synth-like tremolo. A Volume control can add up to 12 dB of boost to offset the level drop that tremolo often causes.
There is one input and two outputs (Mono/Left and Right). The Right output carries the same effect with the waveform shapes reversed, which makes stereo panning possible with two amplifiers. A footswitch toggles buffered bypass, and the status LED pulses at the modulation rate. Power comes from the included 9V battery or an optional center-negative 9V supply.
Videó
Műszaki adatok
- Márka
- Electro-Harmonix
- Modell
- Nano Pulsar
- Kategória
- Effektek és pedálok
Controls
- Knobs
- Volume, Depth, Shape, Rate
- Mode switch
- Triangle Wave / Square Wave
- Rate range
- Approx. 20 seconds to 30 Hz
- Volume boost
- Up to 12 dB
- Footswitch
- Toggles buffered bypass / effect
- Status LED
- Pulses at modulation rate when engaged
Inputs
- Input
- 1 x input jack
Outputs
- Outputs
- Mono/Left and Right, 1/4" mono jacks
- Audio
- Stereo Out
Audio
- Circuit
- Analog
- Bypass
- Buffered Bypass
Power
- Power supply
- 9V battery included (optional 9.6VDC-200mA power adapter not included)
- Current draw
- 30mA
- Power jack
- 9VDC, center-negative; do not exceed 12VDC
Physical
- Dimensions
- 4.5 x 2.75 x 2.1 in
- UPC
- 683274012360
In the box
- Included
- 9V battery