Hum Debugger
A compact digital hum eliminator pedal for guitar and other mono audio sources. It removes mains hum from the signal chain and is aimed at players dealing with noisy pickups or rigs.
- Digital hum eliminator, not a gate or suppressor
- Normal/Strong toggle sets amount of hum elimination
- True bypass footswitch
- Die-cast chassis, 4.75 x 4 x 2.25 in
- 7.5VAC 400mA power adapter included
- Released in 2007
Myndir
8Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur Hum Debugger birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The Hum Debugger is a footswitchable pedal that removes hum from a mono audio signal. It uses a digital circuit and is meant to work with any pickup type and at any playing volume. It is positioned as a hum extractor rather than a noise gate or noise suppressor.
A two-position Normal/Strong toggle sets how much hum is removed. The footswitch switches between the active effect and true bypass, so the signal passes untouched when the pedal is off. The housing is a compact die-cast chassis.
The instrument plugs into the Input jack, and the Amp jack goes to an amplifier or the rest of the effects chain, so it sits in the signal path like any other effects pedal. It runs from the supplied 7.5VAC 400mA power adapter and first appeared in 2007.
Myndband
Tækniupplýsingar
- Framleiðandi
- Electro-Harmonix
- Líkan
- Hum Debugger
- Flokkur
- Effektar og pedalar
Audio
- Circuit
- Digital
- Audio
- Mono
- Bypass
- True Bypass
- Hum elimination modes
- Normal / Strong
Connectivity
- Input jack
- Instrument input
- Amp jack
- Output to amplifier or effects chain
Controls
- Toggle switch
- Normal/Strong, sets amount of hum elimination
- Footswitch
- Toggles active and True Bypass modes
Power
- Power supply
- 7.5VAC-400mA power adapter included
- Current draw
- 125mA(AC)
Physical
- Dimensions (in)
- 4.75 x 4 x 2.25
- Chassis
- Die-cast
General
- Year released
- 2007
- UPC
- 683274010625
In the box
- Power adapter
- 7.5VAC-400mA included