Holy Grail Plus
A digital mono reverb pedal offering spring, hall, room and flerb modes, with a multifunction Amount control for decay, damping and modulation speed. It suits guitarists wanting several reverb types in one compact true-bypass unit.
- Spring, hall, room and flerb reverb modes
- Multifunction Amount knob: decay, damping, modulation speed
- Blend knob from 100% dry to 100% wet
- True bypass with status LED
- Die-cast chassis, 4.75 x 4 x 2.25 in
- Power adapter included (9.6VDC, 200mA)
Myndir
8Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur Holy Grail Plus birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The Holy Grail Plus is a digital reverb pedal built on the original Holy Grail's spring, hall and flerb reverbs, with an added room mode. A four-position Reverb switch selects the mode, and a Blend knob sets the wet/dry mix from fully dry to fully wet.
The Amount knob changes function depending on the selected reverb mode, giving control over decay, damping and modulation speed. A status LED shows when the effect is active, and a footswitch toggles it on and off. The pedal uses true bypass, so the signal path is untouched when the effect is off.
Connections are a single 1/4" input and a single 1/4" output for mono operation. The pedal sits in a compact die-cast chassis and runs from the supplied 9.6VDC, 200mA power adapter, drawing 190mA. It was released in 2008 and discontinued in 2022.
Myndband
Tækniupplýsingar
- Framleiðandi
- Electro-Harmonix
- Líkan
- Holy Grail Plus
- Flokkur
- Effektar og pedalar
Audio
- Circuit
- Digital
- Audio
- Mono
- Reverb modes
- Spring, Hall, Room, Flerb
- Bypass
- True Bypass
Controls
- Blend knob
- Wet/dry mix from 100% Dry to 100% Wet
- Amount knob
- Function changes with each reverb mode
- Reverb switch
- Spring, Hall, Room or Flerb
- Footswitch
- Bypass toggle
- Status LED
- Lit when effect is active
Inputs
- Input jack
- 1/4" audio input
Outputs
- Output jack
- 1/4" audio output
Power
- Power supply
- 9.6VDC-200mA power adapter included
- Current draw
- 190mA
Physical
- Dimensions
- 4.75 x 4 x 2.25 in
- Chassis
- Die-cast, compact
In the box
- Power adapter
- Included