Holy Grail Plus
A digital mono reverb pedal offering spring, hall, room and flerb modes, with a multifunction Amount control for decay, damping and modulation speed. It suits guitarists wanting several reverb types in one compact true-bypass unit.
- Spring, hall, room and flerb reverb modes
- Multifunction Amount knob: decay, damping, modulation speed
- Blend knob from 100% dry to 100% wet
- True bypass with status LED
- Die-cast chassis, 4.75 x 4 x 2.25 in
- Power adapter included (9.6VDC, 200mA)
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine Holy Grail Plus, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
The Holy Grail Plus is a digital reverb pedal built on the original Holy Grail's spring, hall and flerb reverbs, with an added room mode. A four-position Reverb switch selects the mode, and a Blend knob sets the wet/dry mix from fully dry to fully wet.
The Amount knob changes function depending on the selected reverb mode, giving control over decay, damping and modulation speed. A status LED shows when the effect is active, and a footswitch toggles it on and off. The pedal uses true bypass, so the signal path is untouched when the effect is off.
Connections are a single 1/4" input and a single 1/4" output for mono operation. The pedal sits in a compact die-cast chassis and runs from the supplied 9.6VDC, 200mA power adapter, drawing 190mA. It was released in 2008 and discontinued in 2022.
Físeán
Sonraíochtaí
- Branda
- Electro-Harmonix
- Samhail
- Holy Grail Plus
- Catagóir
- Éifeachtaí agus pedail
Audio
- Circuit
- Digital
- Audio
- Mono
- Reverb modes
- Spring, Hall, Room, Flerb
- Bypass
- True Bypass
Controls
- Blend knob
- Wet/dry mix from 100% Dry to 100% Wet
- Amount knob
- Function changes with each reverb mode
- Reverb switch
- Spring, Hall, Room or Flerb
- Footswitch
- Bypass toggle
- Status LED
- Lit when effect is active
Inputs
- Input jack
- 1/4" audio input
Outputs
- Output jack
- 1/4" audio output
Power
- Power supply
- 9.6VDC-200mA power adapter included
- Current draw
- 190mA
Physical
- Dimensions
- 4.75 x 4 x 2.25 in
- Chassis
- Die-cast, compact
In the box
- Power adapter
- Included