Deluxe Bass Big Muff Pi
Analog bass fuzz pedal based on the Black Russian Big Muff tone, with a blend control, noise gate and a footswitchable crossover that filters the fuzz and dry signals separately. Aimed at bass players who want a controllable low end.
- Analog bass fuzz based on the Black Russian Big Muff
- Footswitchable crossover with HPF on fuzz and LPF on dry signal
- Blend knob mixes dry and fuzzed signal
- Built-in noise gate with adjustable threshold
- Effect, buffered direct and XLR DI outputs
- Input pad switch for active pickups; 9V battery included
Fotók
8Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy Deluxe Bass Big Muff Pi modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The Deluxe Bass Big Muff Pi is an analog fuzz built for bass guitar, with a tone modelled on the Black Russian Big Muff of the 1990s. Volume, Blend, Tone, Sustain and Gate knobs set the output level, the dry/fuzz mix, the tone of the fuzzed signal only, the amount of fuzz and the noise gate threshold.
A footswitchable Crossover section splits the signal: a second-order high pass filter (HPF) feeds the distortion circuit, while the dry signal passes through a second-order low pass filter (LPF). This keeps the low end clear and focused while the fuzz stays bright. A toggle switch on the input applies 10dB of attenuation for basses with active pickups. A separate bypass footswitch selects between the effect and a buffered bypass, and LEDs show the state of the effect (red) and the crossover (green).
The pedal has three outputs: a main effect output, a buffered direct output of the dry bass signal, and a low impedance XLR DI output for mixers and recording gear. It sits in a die-cast chassis and runs on a 9V battery, which is included, or on an optional 9.6VDC power adapter that is sold separately.
Videó
Műszaki adatok
- Márka
- Electro-Harmonix
- Modell
- Deluxe Bass Big Muff Pi
- Kategória
- Effektek és pedálok
Inputs
- Instrument input
- 1/4" input
- Input pad
- Switchable 0dB / -10dB
Outputs
- Effect output
- 1/4" output
- Direct output
- 1/4" buffered dry output
- DI output
- XLR, low impedance
Controls
- Knobs
- Volume, Blend, Tone, Sustain, Gate, HPF, LPF
- Switches
- Input pad toggle
- Footswitches
- Bypass, Crossover
- Crossover filters
- Second-order high pass and low pass
Audio
- Circuit
- Analog
- Bypass
- Buffered Bypass
- Audio
- Mono
- Effect type
- Fuzz / Distortion / Sustainer
Power
- Power supply
- 9V battery included
- Optional adapter
- 9.6VDC-200mA (not included)
- Current draw
- 15mA
Physical
- Dimensions
- 5.75 x 4.75 x 2.5 in
- Chassis
- Die-cast
In the box
- Battery
- 9V battery