Deluxe Bass Big Muff Pi
Analog bass fuzz pedal based on the Black Russian Big Muff tone, with a blend control, noise gate and a footswitchable crossover that filters the fuzz and dry signals separately. Aimed at bass players who want a controllable low end.
- Analog bass fuzz based on the Black Russian Big Muff
- Footswitchable crossover with HPF on fuzz and LPF on dry signal
- Blend knob mixes dry and fuzzed signal
- Built-in noise gate with adjustable threshold
- Effect, buffered direct and XLR DI outputs
- Input pad switch for active pickups; 9V battery included
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine Deluxe Bass Big Muff Pi, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
The Deluxe Bass Big Muff Pi is an analog fuzz built for bass guitar, with a tone modelled on the Black Russian Big Muff of the 1990s. Volume, Blend, Tone, Sustain and Gate knobs set the output level, the dry/fuzz mix, the tone of the fuzzed signal only, the amount of fuzz and the noise gate threshold.
A footswitchable Crossover section splits the signal: a second-order high pass filter (HPF) feeds the distortion circuit, while the dry signal passes through a second-order low pass filter (LPF). This keeps the low end clear and focused while the fuzz stays bright. A toggle switch on the input applies 10dB of attenuation for basses with active pickups. A separate bypass footswitch selects between the effect and a buffered bypass, and LEDs show the state of the effect (red) and the crossover (green).
The pedal has three outputs: a main effect output, a buffered direct output of the dry bass signal, and a low impedance XLR DI output for mixers and recording gear. It sits in a die-cast chassis and runs on a 9V battery, which is included, or on an optional 9.6VDC power adapter that is sold separately.
Físeán
Sonraíochtaí
- Branda
- Electro-Harmonix
- Samhail
- Deluxe Bass Big Muff Pi
- Catagóir
- Éifeachtaí agus pedail
Inputs
- Instrument input
- 1/4" input
- Input pad
- Switchable 0dB / -10dB
Outputs
- Effect output
- 1/4" output
- Direct output
- 1/4" buffered dry output
- DI output
- XLR, low impedance
Controls
- Knobs
- Volume, Blend, Tone, Sustain, Gate, HPF, LPF
- Switches
- Input pad toggle
- Footswitches
- Bypass, Crossover
- Crossover filters
- Second-order high pass and low pass
Audio
- Circuit
- Analog
- Bypass
- Buffered Bypass
- Audio
- Mono
- Effect type
- Fuzz / Distortion / Sustainer
Power
- Power supply
- 9V battery included
- Optional adapter
- 9.6VDC-200mA (not included)
- Current draw
- 15mA
Physical
- Dimensions
- 5.75 x 4.75 x 2.5 in
- Chassis
- Die-cast
In the box
- Battery
- 9V battery