BASS9
A digital, polyphonic pedal that turns a regular guitar signal into nine bass sounds, shifting pitch one to two octaves down without special pickups, MIDI or instrument changes. It suits guitarists who want bass tones or a split guitar/bass setup from one pedal.
- Nine bass programs on one rotary mode knob
- Polyphonic tracking, one to two octaves down
- Works on guitar with no special pickup or MIDI
- Independent Effect and Dry volume knobs
- Always-active Dry output at unity gain
- Selectable buffered bypass; power adapter included
Fotók
7Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy BASS9 modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The BASS9 is a polyphonic bass pedal from the Electro-Harmonix 9 Series. It uses a transposing algorithm tuned for dropping one to two octaves with good dynamics and tracking, and works from a standard guitar with no hex pickup, MIDI or modification.
A rotary mode knob selects one of nine programs: Precision, Longhorn, Fretless, Synth, Virtual, Bowed, Split Bass, 3:03 and Flip-Flop. The Virtual program lets the player adjust body density and neck length. Split Bass assigns notes below F#3 to a bass voice while the higher strings keep playing chords or melody. Flip-Flop is a logic-driven sub-octave generator. Two control knobs adjust parameters specific to each program.
Separate Effect and Dry volume knobs set the mix at the Effect output, and a second Dry output always carries the input signal at unity gain. The pedal has a single input, a footswitch with status LED and a selectable buffered bypass, and runs from the supplied power adapter.
Videó
Műszaki adatok
- Márka
- Electro-Harmonix
- Modell
- BASS9
- Kategória
- Effektek és pedálok
Audio
- Circuit
- Digital
- Audio
- Mono
- Bypass
- Selectable Buffered Bypass
- Programs
- 9
Controls
- Mode knob
- Selects bass patch (9 programs)
- CTRL 1
- Adjusts parameter per selected program
- CTRL 2
- Adjusts parameter per selected program
- Effect volume
- Overall volume of selected patch at Effect output
- Dry volume
- Level of untreated signal at Effect output
- Footswitch
- Toggles Effect output between bypass and effect, with status LED
Inputs
- Input jack
- 1 x ¼" instrument/pedal input
Outputs
- Effect output
- Mix of Dry and Effect volume controls
- Dry output
- Always active, input signal at unity gain
Power
- Power supply
- 9.6VDC-200mA power adapter included
- Current draw
- 100mA
Physical
- Dimensions
- 4.75 x 4 x 2.25 in
In the box
- Power adapter
- Included
- UPC
- 683274012261