ABRAMS100
A compact 100-watt Class-D guitar amp head weighing 2.5 lbs, built for high headroom and clean tones. It suits players who run pedals or modelers and want a light, powerful amp with EQ, reverb and an effects loop.
- 100 W Class-D power in a 2.5 lb head
- High-headroom analog front end
- 3-band EQ with bright switch
- Built-in digital spring reverb
- Series FX loop, return ahead of reverb and volume
- 4 to 16 ohm speaker output
Zdjęcia
6Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi ABRAMS100, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The ABRAMS100 is a Class-D guitar amplifier head rated at 100 watts, housed in a small chassis of 8.5 x 7.5 x 2.5 inches. It uses a high-headroom analog front end that stays clean with some character. Raising the gain adds harmonic richness with only light breakup, which makes it a suitable platform for pedals and modelers.
Tone shaping comes from a three-band EQ (bass, mid, treble) and a bright switch that adds treble and presence, useful at low volumes or with dark-sounding speaker cabinets. A built-in digital spring reverb has its own level knob. Gain, volume and reverb controls sit alongside the EQ on the front.
A series effects loop with send and return jacks lets time-based and modulation effects sit after the preamp. The return goes directly to the power amp section, ahead of the reverb and volume controls, so it also works with external preamps or modelers. The speaker output accepts 4 to 16 ohm loads, and power comes through a standard IEC inlet. The amp needs 12 to 15 seconds to warm up after switching on.
Wideo
Specyfikacja
- Marka
- Electro-Harmonix
- Model
- ABRAMS100
- Kategoria
- Nagłośnienie › Wzmacniacze
Audio
- Output power
- 100 W (Class-D)
- Circuit
- Analog
- EQ
- 3-band (Bass, Mid, Treble) with Bright switch
- Reverb
- Built-in digital spring reverb
- Input impedance
- 100 MΩ
Controls
- Knobs
- Gain, Bass, Mid, Treble, Reverb, Volume
- Switches
- Bright, On/Off
Inputs
- Instrument input
- 1 x ¼" jack
- FX loop return
- 1 x jack, direct to power amp section
Outputs
- Speaker output
- 1 x jack, 4 Ω to 16 Ω
- FX loop send
- 1 x jack, taken after the EQ section
- Rated load power
- 100 W RMS cabinet required
Connectivity
- FX loop type
- Series
Power
- Power connection
- IEC AC inlet
- Warm-up time
- 12-15 seconds
Physical
- Dimensions
- 8.5 x 7.5 x 2.5 in
- Weight
- 2.5 lbs