Vertex III OW-VJ63S
ELAC Už sa nevyrába

Vertex III OW-VJ63S

A 6-inch two-way sealed on-wall speaker from ELAC's Vertex III Custom Series, with a JET folded ribbon tweeter and supplied wall brackets. Intended for custom-install and home theater setups where it can be mounted vertically or horizontally.

  • 2-way sealed on-wall speaker with 6-inch woofer
  • JET folded ribbon tweeter, crossover at 2,400 Hz
  • Frequency response 48 Hz to 50 kHz
  • Vertical or horizontal mounting with rear tuning switch
  • Wall brackets included; keyhole inserts and cable channels
  • 4 ohm nominal impedance, 40–120 W recommended amplifier power
Predať taký istý

Fotky

6

Inzeráty

Tento model zatiaľ nemá inzeráty

Keď niekto bude predávať Vertex III OW-VJ63S, inzeráty a história predajov sa zobrazia tu.

Predať taký istý

Popis

The OW-VJ63S is a sealed-cabinet, two-way on-wall loudspeaker. It pairs a single 6-inch woofer with ELAC's JET folded ribbon tweeter, an air-motion-transformer design, and the crossover sits at 2,400 Hz. The woofer uses an aluminum cone with a crystal-shaped surface that adds stiffness. The stated response runs from 48 Hz to 50 kHz at a sensitivity of 86 dB (2.83 V/1 m) and a nominal impedance of 4 ohms.

The cabinet can be mounted either vertically or horizontally. Four recessed keyhole inserts take the wall fixings, and routed channels leave room for cables so the speaker can sit flush against the wall. Supplied brackets offer an alternative way to hang it in either orientation. A switch on the rear of the cabinet changes the tweeter tuning to suit the chosen orientation.

The speaker is designed to share the sound character of ELAC's home audio range, so it can be used as a surround alongside front-channel speakers or soundbars from the same family. It has a black baffle and a black fabric grille. Recommended amplifier power is 40 to 120 watts.

Parametre

Značka
ELAC
Model
Vertex III OW-VJ63S
Kategória
Hi-Fi a domáce audio › Reproduktory

Audio

Speaker type
2-way, sealed cabinet
Tweeter
Jet Folded Ribbon
Woofers
1x6
Crossover frequency
2,400 Hz
Frequency response
48 to 50,000 Hz
Sensitivity
86 dB at 2.83 V/1 m
Nominal impedance
4 Ohm

Power

Recommended amplifier power
40 to 120 Watts
Nominal/peak power handling
120/160 Watts

Physical

Finish
Black baffle
Grille
Black Fabric Grille
Height
20.47 in / 520 mm
Width
9.76 in / 248 mm
Mounting depth
3.82 in / 97.0 mm

Mounting

Mounting orientation
Horizontal or vertical
Wall mounting
4 recessed keyhole inserts
Tweeter tuning
Rear switch for vertical or horizontal mounting

In the box

Wall mount brackets
Included
Grille
Black fabric grille

Údaje: elac.com; fotografie: ELAC product page · aktualizované 2026-10-13 · Vidíš chybu? Napíš nám