IS-AMP1650-BK
A 16-channel, multi-zone Class D integrated amplifier from ELAC's Integrator Series, built for custom-installation projects. It routes any input to any output and is set up through a web interface, and it mounts in a 2 RU rack space.
- 16 input and 16 output channels
- Discrete Class D, 50 W per channel at 4 and 8 ohms
- 100 W bridged output
- Full matrix routing with 8 assignable outputs
- Web GUI with parametric EQ per output
- Control4 and Crestron IP control; 2 RU rack size
Fotky
6Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať IS-AMP1650-BK, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The IS-AMP1650-BK is a 16-input, 16-channel multi-zone amplifier in the Integrator Series. It uses a discrete Class D topology and delivers 50 W per channel into 4 or 8 ohms, or 100 W bridged. Its DSP and CPLD provide full matrix routing, so any input can be sent to any output.
Eight of the outputs are assignable. A room can be powered from in-ceiling speakers on the built-in amplifier channels, with one output assigned to a powered subwoofer in the same room. High-pass filters can be applied to in-ceiling or in-wall speakers. Each output has a full parametric equalizer, and presets for ELAC speakers are available to shorten setup.
Setup and tuning are done in a web GUI. Its status screen shows the state of each channel with input and output levels, and settings can be saved and reused across projects. For monitoring, each zone has 16-bit microprocessors that watch voltage, current and temperature, and the unit tracks 10 thermal points. Third-party control is supported through IP commands for Control4 and Crestron.
Parametre
- Značka
- ELAC
- Model
- IS-AMP1650-BK
- Kategória
- Hi-Fi a domáce audio › Zosilňovače
Inputs
- Input channels
- 16
Outputs
- Output channels
- 16
- Assignable outputs
- 8
- Power output per channel @ 4 ohms
- 50 W
- Power output per channel @ 8 ohms
- 50 W
- Bridged output power
- 100 W
Audio
- Topology
- Discrete Class D
- Frequency response
- 20 Hz - 20 KHz
- DSP
- Full parametric EQ per output, full matrix routing
- Monitoring
- 10 thermal points, 10 microprocessors, 3 DSP, 1 CPLD
Connectivity
- Setup interface
- Web GUI
- IP commands (third-party control)
- Control4, Crestron
Physical
- Dimensions (Width x Length)
- 425.45 mm x 346.08 mm
- Rack spacing
- 2 RU
Software
- Firmware
- 0.7.0 and 0.6.8 available
- Control4 driver
- Version 1.0.0