Debut S10.2
A 10-inch powered bass-reflex subwoofer from the Debut 2.0 series, rated at 100 W RMS (200 W peak) with a 35–150 Hz response. Suited to adding low-frequency output to home theater and stereo music systems.
- 10-inch high-excursion doped paper cone woofer
- 100 W RMS / 200 W peak BASH-tracking amplifier
- 35–150 Hz frequency response
- Crossover continuously adjustable 50–150 Hz
- Braced MDF cabinet with dual flared port
- Auto power on/off, 0.5 W standby
Fotografije
8Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal Debut S10.2, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The S10.2 is a self-powered subwoofer built around a single 10-inch high-excursion doped paper cone driver. It sits in a bass-reflex cabinet with a dual flared port, and the amplifier is a BASH-tracking type rated at 100 W RMS (THD below 0.1%) or 200 W peak.
The MDF cabinet has a horizontal brace to stiffen the enclosure and reduce unwanted vibration. The crossover is continuously adjustable from 50 to 150 Hz, and the frequency response runs from 35 to 150 Hz. An auto power function wakes the unit when it detects an audio signal and switches it off after a long idle period; standby draw is 0.5 W.
Connection is through an LFE RCA input. The cabinet is finished in Black Ash vinyl and measures 343 mm on each side, with a net weight of 13.0 kg. An AC power cable is the included accessory.
Video
Specifikacije
- Znamka
- ELAC
- Model
- Debut S10.2
- Kategorija
- Hi-Fi in domači avdio › Zvočniki
Audio
- Speaker type
- Powered bass-reflex subwoofer w/ Dual Flared Port
- Woofer
- 1x 10-inch high-excursion doped paper cone
- Frequency response
- 35 to 150 Hz
- Crossover frequency
- 50 to 150 Hz, continuously adjustable
Amplifier
- Amplifier type
- BASH-Tracking
- Maximum amplifier power
- 200 Watts peak / 100 Watts RMS THD <0.1%
Inputs
- Inputs
- LFE RCA
Power
- Standby power consumption
- 0.5 Watt
- Auto power on/off
- Yes
Physical
- Cabinet finish
- Black Ash vinyl
- Cabinet construction
- Braced MDF cabinet with horizontal brace
- Dimensions (W x H x D)
- 13.5 x 13.5 x 13.5 in / 343 x 343 x 343 mm
- Net weight
- 28.70 lbs / 13.0 kg
In the box
- Accessories included
- AC power cable