WiLD-TX
Master transmitter of the Ecler WiLD wireless audio system. It takes an RCA or Bluetooth source and sends it to paired WiLD receivers over DECT-band radio, for installers fitting retail, hospitality, education and similar spaces.
- Up to 32 WiLD receivers per transmitter
- Up to 150 m range with direct line of sight
- Inputs: stereo RCA and Bluetooth
- 16-bit uncompressed audio at 48 kHz, DECT band
- Latency under 26 ms from analogue input to speaker
- Mute contact input and WPaVOL remote volume port
Bilder
7Annonser
Ingen annonser for denne modellen ennå
Når noen selger en WiLD-TX, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
WiLD-TX is the transmitter that forms the network in an Ecler WiLD long-distance wireless audio system. It has two inputs, a stereo unbalanced RCA pair and a Bluetooth input, with a 3-band tone control and a master volume knob on the front. The selected signal is converted to mono and sent to the paired receivers, such as the WiLD-14 and WiLD-SB18. It also holds the system-wide settings, including the active input, equalization and output levels.
The link runs in the 1880–1930 MHz DECT band with 16-bit uncompressed audio at 48 kHz. One transmitter can control up to 32 receivers, with a recommended range of 150 m in direct line of sight. Latency from the analogue input to the receiver speaker is under 26 ms. Receivers are paired with a button on the rear panel.
The unit is powered over USB-C from an external universal power supply, and the same USB port is used for service and firmware updates. A MUTE contact input silences the system when a dry contact closes. A REMOTE port accepts a WPaVOL or compatible wall panel for simple user volume control. The metal enclosure can be used on a surface, under a shelf or table, in a rack, or on a wall.
Video
Spesifikasjoner
- Merke
- Ecler
- Modell
- WiLD-TX
- Kategori
- Live-lyd › Trådløse systemer
Inputs
- Audio inputs
- 2 (analogue stereo and Bluetooth)
- Analogue input connector
- 2 x RCA unbalanced
- Analogue input sensitivity
- -10 dBV to 0 dBV
- Analogue input impedance
- >20 kΩ
- Max input level
- +6.021 dBV
- THD + Noise
- <1% (1 kHz)
- Bluetooth
- Compliant 5.3, Class 2 & 3
- Bluetooth range
- 25 m (ideal conditions)
- Bluetooth profiles
- A2DP 1.3.2 / AVRCP 1.6.2
- Bluetooth codecs
- SBC
Wireless
- Frequency band
- 1880 - 1930 MHz, EU DECT, US DECT
- Coverage range
- Up to 150 m from a TX to any paired RX, direct line of sight
- Max receivers per transmitter
- 32 units
- Audio transmission
- 16 bit uncompressed, 48 kHz SR
- Frequency response
- 10 Hz – 15 kHz (-1 dB)
- ADC resolution
- 24 bits
- ADC dynamic range
- 96 dB
- Latency
- From TX analog audio IN to RX speaker <26 ms
Control
- USB
- Power supply and service & firmware updates
- Analogue remote control
- Compatible with WPa series analogue volume control panels
- External MUTE
- Normally open
- Auto standby time
- 1200 seg
- Auto standby threshold
- 20 dB
Power
- Power supply
- External, universal power supply
- AC mains requirement
- 100-240 VAC @ 50-60 Hz, using supplied DC adapter
- Power connector
- 5 VDC IN, USB-C
- Power consumption
- 1 A at 5 V
Physical
- Installation options
- 1 Rack U, wall or under a surface
- Enclosure material
- Metal
- Finished colour
- Black (RAL 9005)
- Dimensions (WxHxD)
- 217 x 44 x 117 mm / 8.54 x 1.73 x 4.61 in
- Dimensions incl. antennas (WxHxD)
- 217 x 111 x 117 mm / 8.54 x 4.37 x 4.61 in
- Weight
- 0.9 kg / 1.98 lb
- Operating temperature
- -10°C to 40°C / 14°F to 104°F
In the box
- Included accessories
- External universal power supply, 2x DECT antennas, 1x BT antenna, half rack front adapter, 2x mounting ears, wall-mount bracket, Euroblock connector (mute)
- Optional accessories
- WPaVOL for volume control