WiLD-14
Self-powered two-way 4-inch lamp-style loudspeaker that receives audio wirelessly from a WiLD-TX transmitter and mounts on standard ceiling light rails. Intended for retail, museums, hospitality and similar installations needing clean, cable-free speaker placement.
- 4" woofer + 0.75" tweeter, 40 W RMS / 160 W peak
- Wireless audio from WiLD-TX, up to 150 m line of sight
- Mounts on 4-wire 3-circuit light rails, powered from the rail
- Rear PAIR button and status LED; USB-C for firmware
- Latency under 26 ms; 16-bit / 48 kHz uncompressed audio
- White (RAL 9003) or black (RAL 9005) finish
Fotografije
6Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao WiLD-14, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The WiLD-14 is a powered loudspeaker built into a lamp-shaped enclosure. It contains a 4" woofer and a 0.75" tweeter driven by an internal amplifier rated at 40 W RMS, and it receives its audio signal over a DECT-band wireless link from the paired WiLD-TX transmitter. Line-of-sight range from the transmitter is up to 150 m.
It attaches to 4-wire, 3-circuit lighting track systems such as Global Trac Pro or compatible rails, and takes its mains power (100-240 V AC, 50-60 Hz) directly from the rail bracket, so no separate audio or power cable run is needed. The head swivels for pan and tilt, and a surface-mount adapter (TUBE SMA) is available as an option for installations without a rail.
Pairing to the transmitter is done with a PAIR button on the rear panel, with an LED showing status. A USB-C port is provided for service and firmware updates. The enclosure is ABS with a metal grille, supplied in white (RAL 9003) or black (RAL 9005).
Videozapis
Specifikacije
- Marka
- Ecler
- Model
- WiLD-14
- Kategorija
- Live zvuk › Bežični sustavi
Wireless (WiS RF digital audio)
- Frequency band
- 1880 - 1930 MHz, EU DECT, US DECT
- Coverage range
- Up to 150 m from a TX to any paired RX, direct line of sight
- Audio channels
- 1 stereo audio ch received from the WiLD-TX network
- Audio transmission
- 16 bit uncompressed, 48 kHz SR
- Frequency response (digital audio)
- 10 Hz – 15 kHz (-1 dB)
- Latency
- From TX Analog Audio IN to RX Speaker <26 ms
- Pairing time
- Up to 60 s
Acoustics
- Effective frequency range
- 63 - 20 kHz (-10 dB)
- Coverage angle
- 320°
- Sensitivity
- 86 dB (1W/1m)
- Maximum SPL
- 102 dB continuous / 108 dB peak
- Ways
- 2 ways
- Low frequency driver
- 4" woofer
- High frequency driver
- 0.75" tweeter
- Nominal impedance
- 4 Ω
Amplifier and audio
- Power
- 40 W RMS / 160 W Peak
- Audio inputs
- Wireless Audio: Digital, Mono
- Audio outputs
- Internal Loudspeaker: Analogue, Mono, Self powered
- THD + Noise
- <1% @ 1 kHz Full power
- Signal to noise ratio
- >90.5 dB @ 30 W RMS
Power
- Power supply
- Universal, internal power supply
- AC mains requirement
- 100-240 VAC @ 50-60 Hz
- AC mains connector
- From lighting rail bracket
- Power consumption
- 50 W
- Power consumption standby
- <2 W
Control and connectivity
- Other controls
- PAIR / UNPAIR via panel button
- LED indicators
- Status
- Communication interfaces
- USB-C Service & firmware updates
Physical
- Connection type
- Ceiling rail AC connection
- Installation options
- Ceiling light rails, or surface using TUBE SMA
- Mounting system
- Lighting rail mount compatible
- Pan and tilt
- Swivel (pan and tilt)
- Compatible rail systems
- 4 wire 3 circuit track system, Global Trac Pro or compatibles
- Enclosure material
- ABS
- Grille material
- Metal
- Finished colour
- White (RAL 9003) or black (RAL 9005)
- Dimensions
- 128.6 x 205.3 mm / 5.06 x 8.08 in. (∅xD)
- Weight
- 1.5 kg / 3.3 lb
- Operating temperature
- -10°C to 40°C / 14°F to 104°F
- Operating humidity
- <85% HR
In the box
- Included accessories
- Lighting rail mount
- Optional accessories
- Surface mount accessory (TUBE SMA)
- Pieces per box
- 1 unit
- Shipping dimensions
- 385 x 178 x 165 mm / 15.16 x 7.01 x 6.50 in. (WxHxD)
- Shipping weight
- 2.2 kg / 4.85 lb