Ecler VEO-XTI1CG2
Encoder (transmitter) for sending HDMI video over a 1Gb Ethernet network using H.265/H.264 compression, up to 1920x1200@60Hz over a single Cat5e/6/7 cable of up to 100 m. Meant for installers building scalable point-to-point or multipoint AV systems in schools, shops and offices.
- H.265 / H.264 HDMI over IP, up to 1920x1200@60Hz 4:4:4
- Up to 100 m over Cat5e/6/7 on a 1Gb network
- Latency under 100 ms; bitrate 1-20 Mbps
- Video walls up to 9x9; HDCP 1.4
- PoE (802.3af Class 3) or 12 V DC; RS-232 pass-through
Bilder
5Annonser
Ingen annonser for denne modellen ennå
Når noen selger en Ecler VEO-XTI1CG2, vises annonsene og salgshistorikken her.
Selg en slikBeskrivelse
The VEO-XTI1CG2 is the transmitter half of a pair with the VEO-XRI1CG2 receiver. It takes an HDMI source and sends it over a 1Gb Ethernet network using H.265 or H.264 compression, with latency under 100 ms. Unicast works on unmanaged 1Gb networks, while multicast needs a managed network with IGMP snooping. Video wall layouts of up to 9x9 displays are supported, along with scaling, mainstream and sub stream encoding, and a configurable average bitrate of 1-20 Mbps.
Audio can be embedded into or extracted from the stream through unbalanced 3-pin Euroblock connectors (LPCM 2.0 channel, up to 24-bit, 32/44.1/48 kHz). RS-232 pass-through is available on a Euroblock connector. EDID can be managed from the front panel or the web interface, and the front panel has UP and DOWN buttons, status LEDs and an LCD display.
The unit connects through an RJ45 port and can be powered by PoE (802.3af Class 3) or by the supplied 12 V DC adapter. Adding the optional VEO-XCTRLG2 controller module enables the built-in web configuration interface and TCP control. The metal half-rack-width case suits desktop use or rack mounting with the optional VEO-RK1CG2 kit.
Spesifikasjoner
- Merke
- Ecler
- Modell
- VEO-XTI1CG2
- Kategori
- Annet
Video
- Video input connector
- HDMI Type A Female, 10.2 Gbps
- Input resolution
- 1920 x 1200 @ 60Hz
- Output resolution
- 1920 x 1200 @ 60Hz
- Video codec
- H.265 / H.264
- Transmission latency
- <100ms
- Chroma subsampling
- RGB4:4:4, YCbCr 4:4:4, YCbCr 4:2:2
- Colour depth
- 8-bit, 10-bit, 12-bit (1080p@60Hz)
- HDCP
- 1.4
- Video composing
- Videowall up to 9x9
Audio
- Audio input
- 3-pins unbalanced Euroblock
- Audio output
- 3-pins unbalanced Euroblock
- Audio format
- LPCM 2.0CH
- Sample rate
- 32/44.1/48KHz
- Bit depth
- Up to 24-bit
- Frequency response
- 20Hz-20KHz
Control
- Control connectors
- RJ45, Euroblock
- Control protocols
- Web, TCP (only with VEO-XCTRLG2), RS-232
- EDID management
- Front Panel, Web settings
- Pass-through
- RS-232 via Euroblock
Network
- Network connector
- RJ45
- Network requirement
- IGMP Snooping
- Average streaming bitrate
- Configurable via software 1-20 Mbps
- Transmission distance
- 100m via Ethernet
Power
- Power supply
- PoE (802.3af Class 3) or External Power supply
- DC input
- 12VDC-1A with coaxial DC connector
- Power consumption
- 3W
Physical
- Dimensions (WxHxD)
- 95 x 21.5 x 120 mm / 3.74 x 0.85 x 4.72 in.
- Weight
- 0.3 Kg / 0.66lb
- Chassis material
- Metal
- Finished colour
- Black
- Operating temperature
- -10°C to 45°C / 14°F to 113°F
In the box
- Included accessories
- 2x 3pins Euroblock connector, 4x M3 screws 4mm, 2x Mounting Ears, 1x 12V PSU
- Optional accessories
- VEO-XCTRLG2, VEO-RK1CG2