Ecler MIMO7272DN
72x72 digital audio matrix for fixed installations, combining 8 analogue mic/line inputs and 8 line outputs with 64 Dante/AES67 channels each way and a 64x64 internal matrix. Suited to multi-zone retail, hospitality, education and corporate systems.
- 72x72 ports: 8 analogue + 64 Dante/AES67 in and out
- Native 64x64 internal digital matrix
- Dual Dante interfaces for redundant networks
- 8 GPI and 8 GPO, RS-232 serial port
- 1RU 19" rack, 3.25 kg
Photos
7Listings
No listings of this model yet
When someone sells a Ecler MIMO7272DN, the listings and the sales history will show here.
Sell one like thisDescription
The MIMO7272DN routes audio between 8 analogue inputs, 8 analogue outputs and 64 Dante/AES67 channels in each direction, through a native internal matrix of 64x64 simultaneous channels. It runs the standard firmware only; no conference firmware is offered. Audio over IP removes cable-length limits by carrying signals across a local Ethernet network.
The analogue inputs are mic/line with software-switched phantom power, and the outputs are line level. Two monitor outputs and a 1/4" headphone jack are also provided. Eight GPI and eight GPO ports handle external control signals. The unit can run EclerNet projects embedded in its processor and act as a server for User Control Panels (UCP) in an EclerNet network.
Two Dante interfaces (primary and secondary) allow redundant Dante networks. A separate Ethernet port serves programming and control, and an RS-232 port supports TP-NET. WPNET wall panels, the PAGENETDN paging station and the WP22DN Dante/AES67 wall interface connect directly over Ethernet, and PoE DC supply is supported. The unit is a 1RU, 19" rack device configured with EclerNet Manager software.
Specifications
- Brand
- Ecler
- Model
- MIMO7272DN
- Category
- Studio › Preamps and outboard
Inputs
- Analogue inputs
- 8, Mic/Line
- Analogue input connection
- Terminal block (symmetrical)
- Input sensitivity
- -50dBV to +10dBV in 0.5dB steps
- Input impedance
- Balanced, >4kΩ
- Max input level
- +27dBV = +30dBu
- Phantom power
- +42VDC, 5mA max. software switched
Outputs
- Analogue outputs
- 8 Line
- Analogue output connection
- Terminal block (symmetrical)
- Max output level
- +18dBV = +21dBu
- Monitor outputs
- 2, terminal block (symmetrical)
- Headphones
- Jack 1/4 (>200mW/200Ω)
Audio
- Sampling rate
- 48 kHz
- Resolution
- 24 bit
- Latency
- <4.3 ms
- Frequency response
- 5Hz to 24kHz (-3dB)
- Dynamic range
- AD: 110dB, DA: 115dB
- THD+Noise (line, 0dBV)
- <0.004%
- Internal matrix
- 64x64
Connectivity
- Audio over IP
- Dante (Brooklyn)/AES67 (32/32 flows)
- Dante/AES67 channels
- 64 in / 64 out
- Dante interfaces
- 2 x RJ45 (Primary / Secondary)
- Ethernet
- Base-Tx 10/100Mb, 1GB Auto X-Over CAT5e or better
- Serial port
- RS-232, DB9 connector
- GPI
- 8, 0 to 12VDC or TTL level
- GPO
- 8, 3 poles isolated relay; 1A, 48VDC max.
Power
- Power supply
- PoE DC supply
- AC mains requirement
- 90-264VCA 47-63Hz
- Power consumption
- 30VA
- Secondary power supply
- +12VDC, 1.2A max.
Physical
- Dimensions (WxHxD)
- 482.6 x 44 x 253 mm / 19 x 1.73 x 9.96 in.
- Weight
- 3.25 kg / 7.17 lb
- Installation
- 19" rack format (1RU)
- Operating temperature
- -10°C to 40°C / 14°F to 104°F
Software
- Control software
- EclerNet Manager from v6.00