Ecler IC6i
A 6.5-inch two-way ceiling loudspeaker with a built-in 70/100 V transformer that also runs on low impedance. It suits installers fitting background sound in retail, hospitality, education, corporate, leisure and fitness spaces.
- 6.5" woofer and 1" tweeter, 2-way
- 40 W RMS / 160 W peak, 8 Ω
- Built-in 70/100 V transformer with multi-tap
- Sensitivity 93 dB, max SPL 109 dB continuous
- Magnetic frameless grille, black or white
Myndir
7Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur Ecler IC6i birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
The IC6i is a two-way in-ceiling or in-wall loudspeaker in an ABS enclosure. It pairs a 6.5" polypropylene woofer, which resists heat and humidity, with a 1" tweeter. It is rated at 40 W RMS (160 W peak) and covers 75 Hz to 20 kHz (-10 dB) with a 163° conical dispersion.
A built-in audio transformer and a tap selector let it run either on a low-impedance line (8 Ω) or on 70 V and 100 V distributed lines, with four power taps for each voltage. The grille is held by magnets and has no frame. It can be removed for painting, and the Ecler logo can also be taken off. Three rotating tabs hold the speaker in the cut-out, and a cutting template is supplied.
Wiring goes to clip-type input terminals. The speaker comes in black (RAL 9005) or white (RAL 9003) and is sold in boxes of two. EASE data files and a mechanical drawing are available from the maker, and an optional IC-TB6 accessory is listed.
Tækniupplýsingar
- Framleiðandi
- Ecler
- Líkan
- IC6i
- Flokkur
- Lifandi hljóð › PA-hátalarar
Audio
- Effective frequency range
- 75Hz-20kHz (-10dB)
- Coverage angle / dispersion
- 163° conical
- Power handling
- 40W RMS / 160W Peak
- Sensitivity
- 93dB (1W/1m)
- Maximum SPL
- 109dB continuous / 115dB peak
- Recommended amplifier power
- 80 W RMS
- Nominal impedance
- 8Ω
Transducers
- Ways
- 2-ways full range
- Low frequency driver
- 6.5" Woofer
- High frequency driver
- 1" Tweeter
Connectivity
- Connection type
- Clip-Type input terminals
- Power options 100V (Hi Z multi-tap)
- 2.5 / 5 / 7.5 / 15W
- Power options 70V (Hi Z multi-tap)
- 1.25 / 2.5 / 3.75 / 7.5W
Physical
- Installation options
- In-ceiling / In-wall
- Enclosure material
- ABS plastic
- Grille material
- Iron
- Grille fixing system
- Magnets
- Mounting system
- 3 rotating tabs
- Finished colour
- White (RAL 9003) / Black (RAL 9005)
- External diameter
- 213 mm / 8.39in.
- Recommended cut out diameter
- 180 mm / 7.09in.
- Required depth
- >73 mm / >2.87in.
- Dimensions (WxHxD)
- 213 x 213 x 72 mm. / 8.39 x 8.39 x 2.83 in.
- Weight
- 1.6 Kg / 3.53 lb
- Operating temperature
- Min: -20°C ; -4°F / Max: 70°C ; 158°F
- Operating humidity
- <85% HR
- Pieces per box
- 2
- Shipping weight
- 4 kg / 8.82 lb
In the box
- Included accessories
- Cutting template
- Optional accessories
- Ecler IC-TB6