ZEQD-Pre
The ZEQD-Pre is an all-analog tube preamp pedal built by EarthQuaker Devices with Dr. Z Amplification. It uses an EF86 pentode and a passive three-band EQ, and has headphone and balanced XLR outputs with analog cab simulation. It suits guitarists and bassists who want a pedalboard amp for practice, direct recording or hybrid rigs.
- EF86 pentode tube preamp in a pedalboard format
- Passive three-band EQ plus separate Boost footswitch
- Headphone output with analog cab simulation
- Balanced XLR out with ground lift and cab sim bypass
- All outputs stay active when the pedal is bypassed
- Mechanical true bypass; 9V DC, 500 mA, center negative
Fotografije
8Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao ZEQD-Pre, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
The ZEQD-Pre is a tube preamplifier in pedal format, developed jointly by EarthQuaker Devices and Dr. Z Amplification. Its gain stage is an EF86 pentode, the tube found in many Dr. Z amps. The pedal has two sides: a passive Bass/Middle/Treble EQ with a Level control, and a Boost side that bypasses the tone controls and has its own Boost knob. Mechanical true bypass switching is used.
Three outputs are available and all of them work at the same time, including when the pedal is bypassed. A TRS headphone jack with analog cabinet simulation serves for quiet practice, and a balanced XLR direct output can feed a console or interface. The XLR output has a Ground Lift switch and a Cab Sim Bypass switch for sending an uncoloured signal to an IR loader or modeling software.
The pedal runs from a 9V DC supply (2.1 mm, center negative) rated at 500 mA or more. Its page lists guitar, bass and amp audio samples, and the device carries a limited lifetime warranty from the maker.
Videozapis
Specifikacije
- Marka
- EarthQuaker Devices
- Model
- ZEQD-Pre
- Kategorija
- Efekti i pedale
Controls
- Rotary knobs
- Boost, Level, Bass, Middle, Treble
- Bass range
- 20 Hz to 400 Hz
- Middle range
- 400 Hz to 2 kHz
- Treble range
- 2 kHz to 20 kHz
- Footswitches
- Activate, Boost
- Side switches
- Ground Lift, Cab Sim Bypass
Audio
- Tube
- EF86 pentode
- EQ
- Passive three-band
- EF86 gain factor
- 185
- EF86 output
- 44V RMS
- Cabinet simulation
- Analog
- Switching
- Mechanical true bypass
Inputs
- Input impedance
- 10 MΩ
Outputs
- Headphone output
- TRS (stereo) ¼" jack
- Direct output
- Balanced XLR
- Output impedance
- Variable
- Headphone out impedance
- 39 Ω
- Direct out impedance
- 100 Ω
Power
- Power supply
- 9V DC, 500 mA or higher, 2.1 mm negative-center barrel
- Current draw
- 500 mA
Physical
- Dimensions
- 5.88 x 3.94 x 2.75 in. (149 x 100 x 70 mm) with knobs
- Artwork
- Geoffrey Crowe
Warranty
- Warranty
- Limited lifetime warranty