
Levitation
Levitation is a reverb pedal for guitar with a vintage voicing that sits between dirty 1960s chambers, classic spring and large plate reverbs. It suits guitarists and keyboard players after anything from a short room slap to long, ringing washes. It is no longer in production.
- Vintage-voiced reverb: chamber, spring and plate character
- Controls: Mix, Decay, Tone, Atmosphere and a Long/short Length toggle
- Flexi-Switch relay true bypass with latching and momentary modes
- 9 V DC, 2.1 mm negative center, 72 mA
- Measures 121 x 64 x 57 mm with knobs
- No longer in production
Снимки
6Обяви
Още няма обяви за този модел
Когато някой продаде Levitation, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
Levitation is a guitar reverb pedal built around four knobs and one toggle switch. Its sound is described as sitting between gritty sixties chamber reverb, classic spring and big ringing plates, and it covers settings from a tight small-room slapback to very long, oscillating trails.
Mix sets the wet/dry balance, while Decay and the Length toggle together control how long the reverb lasts. Tone works as an input bandwidth control for the reverberated signal: fully clockwise removes low end for a brighter reverb, and counterclockwise lets more lows through for a fuller sound. Atmosphere feeds the upper frequencies of the trails back into the reverb to make it more harmonic and ringing.
The pedal uses Flexi-Switch relay-based true bypass, which allows both latching and momentary operation from the same footswitch. Because the switching is relay based, the pedal needs power to pass signal. It runs from a 9 V DC supply with a 2.1 mm negative-center barrel and draws 72 mA. The maker lists it as no longer in production.
Видео
Спецификации
- Марка
- EarthQuaker Devices
- Модел
- Levitation
- Категория
- Ефекти и педали
Controls
- Mix
- Wet/dry blend of the reverb
- Length (toggle)
- Broad-stroke decay time, shorter to left, longer to right
- Decay
- Length of the reverb decay
- Tone
- Input bandwidth control for the reverberated signal
- Atmosphere
- Harmonic regeneration of upper frequencies in the reverb trails
Audio
- Effect type
- Reverb
- Input impedance
- 1 MΩ
- Output impedance
- <10 kΩ
Switching
- Bypass type
- Relay-based true bypass (Flexi-Switch® Technology)
- Footswitch modes
- Latching and momentary
- Power needed to pass signal
- Yes, relay-based switching
Power
- Supply voltage
- 9 V DC
- Connector
- 2.1 mm barrel, negative center
- Current draw
- 72 mA
Physical
- Dimensions (with knobs)
- 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm)
- Production status
- No longer in production
Software
- Operation manual
- Available from the maker