
Ledges
Compact three-mode reverb pedal with Room, Hall and Plate algorithms, six saveable presets and assignable expression control. Aimed at guitarists, bassists and keyboard players who want a range of reverb sounds without menu diving or extra controllers.
- Three reverb modes: Room, Hall and Plate
- Six presets, including expression pedal assignment
- Length, Mix and Damping controls
- Expression input assignable to any control
- Buffered bypass with natural reverb tails
- Flexi-Switch latching and momentary footswitch
Grianghraif
8Fógraí
Níl aon fhógra don tsamhail seo fós
Nuair a dhíolann duine Ledges, taispeánfar na fógraí agus stair na ndíolachán anseo.
Díol ceann mar seoCur síos
Ledges is a reverb pedal built around three algorithms. Room is the darkest, moving from a small boxy space to a large tiled room. Hall continues from where Room ends, running from a large hall to a cathedral. Plate starts as a traditional plate and at its longest setting recirculates the high frequencies into a near-infinite ambient pad that can approach self-oscillation. Three controls (Length, Mix and Damping) shape the sound.
Six preset slots store the control settings, the mode and the expression pedal assignment. The pedal runs in either Live mode, where the knobs apply directly, or Preset mode, where stored presets are used and the knob positions are ignored. Holding the footswitch for at least 0.75 seconds while the effect is on switches between the two modes. An expression pedal can be mapped to any control; it ships assigned to Damping.
Bypass is buffered with tails, so the reverb decays naturally after the pedal is switched off. The footswitch uses relay-based Flexi-Switch operation, supporting both latching and momentary use. The pedal runs from a 9 V DC supply and needs power to pass signal.
Físeán
Sonraíochtaí
- Branda
- EarthQuaker Devices
- Samhail
- Ledges
- Catagóir
- Éifeachtaí agus pedail
Audio
- Effect type
- Reverberation
- Reverb modes
- 3 (Room, Hall, Plate)
- Controls
- Length, Mix, Damping
- Presets
- 6
- Input impedance
- 1 MΩ
- Output impedance
- 100 Ω
- Bypass type
- Buffered bypass with tails
Connectivity
- Expression input
- EXP jack (TRS)
- Expression wiring
- Tip: Wiper, Ring: +3.3V, Sleeve: Ground
- Default expression assignment
- Damping
Switching
- Footswitch type
- Flexi-Switch relay-based, latching and momentary
- Operating modes
- Live and Preset
- Live/Preset toggle
- Hold footswitch for at least 0.75 seconds
Power
- Power supply
- 9 V DC, 2.1 mm barrel, negative center
- Current draw
- 80 mA
Physical
- Dimensions (with knobs)
- 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm)
Warranty
- Warranty
- Limited lifetime warranty