Hizumitas
A relay-bypass distortion pedal made as a recreation of the Elk BM Sustainar used by Wata of Boris. It gives heavy, gritty distortion with a wide-range Tone control, aimed at guitarists after thick, sustained high-gain sounds.
- Recreation of Wata's Elk BM Sustainar distortion
- Controls: Volume, Sustain, Tone
- Tone control shifts between treble grind and heavy bass
- Relay-based true bypass; needs power to pass signal
- 9 V DC, 2.1 mm negative center, 10 mA
- Limited lifetime warranty
Fotky
8Inzeráty
Tento model zatiaľ nemá inzeráty
Keď niekto bude predávať Hizumitas, inzeráty a história predajov sa zobrazia tu.
Predať taký istýPopis
The Hizumitas is a three-knob distortion pedal developed with Wata of the band Boris. It reproduces the sound of her Elk BM Sustainar, a Japanese variant of the Triangle-style BMP circuit, after the designers studied her original unit alongside several vintage BMP and Elk pedals.
Volume sets output level, Sustain sets the amount of distortion and sustain, and Tone shifts the balance between treble and bass rather than acting as a conventional treble roll-off. Turned counterclockwise, it moves from piercing highs to an aggressive midrange grind; turned clockwise, mids and highs recede and the low end comes forward. Output gain is high, with unity at roughly 9-10 o'clock.
The pedal uses relay-based true bypass, so it needs power to pass signal. It runs from a standard 9 V DC supply (2.1 mm, negative center) and draws 10 mA. It is built by hand in Akron, Ohio, and covered by a limited lifetime warranty.
Video
Parametre
- Značka
- EarthQuaker Devices
- Model
- Hizumitas
- Kategória
- Efekty a pedále
Controls
- Volume
- Adjusts output volume; unity around 9-10 o'clock
- Sustain
- More distortion and sustain clockwise, less counterclockwise
- Tone
- Bass boost clockwise, treble boost counterclockwise
- Number of controls
- 3
Audio
- Effect type
- Fuzz / distortion (Fuzz Sustainar)
- Circuit basis
- Elk BM Sustainar (Japanese variant of the Triangle BMP)
- Input impedance
- ≈150 kΩ
- Output impedance
- <10 kΩ
Connectivity
- Bypass type
- Relay-based true bypass
- Power required for bypass
- Yes; requires power to pass signal
Power
- Power supply
- 9 V DC
- Power connector
- 2.1 mm barrel, negative center
- Current draw
- 10 mA
- Higher voltages
- Not supported; do not run at higher voltages
Physical
- Dimensions
- 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
- Origin
- Built by hand in Akron, Ohio, United States
Warranty
- Warranty
- Limited lifetime warranty