Dunes
The Dunes is a compact overdrive pedal that reduces the maker's Palisades 808-style overdrive to its essential controls. It suits guitarists who want a mid-boosting, transparent overdrive in a smaller enclosure. The page marks it as no longer in production.
- Compact version of the Palisades 808-style overdrive
- Voice switch: MOSFET, Silicon or no diode clipping
- Bandwidth switch: Stock or Full Range
- Normal/Bright toggle
- True bypass with relay-based switching
- No longer in production
Myndir
6Auglýsingar
Engar auglýsingar fyrir þetta líkan enn
Þegar einhver selur Dunes birtast auglýsingarnar og sölusagan hér.
Selja svonaLýsing
Dunes is a smaller, simplified version of the Palisades overdrive. It keeps the Gain, Tone and Level controls and adds a three-way Voice switch, a two-way Bandwidth switch and a Normal/Bright toggle.
The Voice switch selects the clipping type: MOSFET for a tight, crunchy sound, Silicon asymmetrical clipping for lighter gain closest to a classic 808 character, or None, which runs from clean boost to gritty op-amp distortion with a large volume increase. Bandwidth can be set to Stock for the classic tone or Full Range for more low end. The Normal/Bright toggle changes the tone between a warm, full sound and a livelier one with more chime.
The pedal is true bypass with electronic relay-based switching, so audio does not pass when it has no power. It runs from a 9 V DC supply with a 2.1 mm negative-center barrel connector and should not be run at higher voltages.
Myndband
Tækniupplýsingar
- Framleiðandi
- EarthQuaker Devices
- Líkan
- Dunes
- Flokkur
- Effektar og pedalar
Controls
- Knobs
- Gain, Tone, Volume
- Voice switch
- MF (MOSFET), N (no diode clipping), Si (silicon diode clipping)
- Bandwidth switch
- Stock / Full Range
- Tone character toggle
- Normal / Bright
Audio
- Input impedance
- 500 kΩ
- Output impedance
- <1 kΩ
- Circuit type
- Overdrive
Switching
- Bypass
- True bypass
- Switching type
- Electronic relay-based
- Signal without power
- Audio will not pass without power
Power
- Supply voltage
- 9 V DC
- Connector
- 2.1 mm barrel, negative center
- Current draw
- 16 mA
Physical
- Dimensions (with knobs)
- 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm)
Status
- Production
- No longer in production
- Documentation
- Operation manual available