Cloven Hoof

Cloven Hoof

The Cloven Hoof Fuzz Grinder is a silicon-transistor fuzz pedal with more than four times the gain of the original Hoof, built for guitarists and bassists wanting a tight, gritty fuzz. It has four controls, including a Shift control for mids, and is no longer in production.

  • Silicon transistors, over 4x the gain of the original Hoof
  • NOS carbon composition resistors in key positions
  • Shift knob cuts or boosts mids
  • True bypass with relay-based switching
  • 9 V battery or 9 V DC, 2.1 mm negative center
  • No longer in production
Sprzedaj taki sam

Zdjęcia

5

Ogłoszenia

Brak jeszcze ogłoszeń tego modelu

Gdy ktoś wystawi Cloven Hoof, ogłoszenia i historia sprzedaży pojawią się tutaj.

Sprzedaj taki sam

Opis

The Cloven Hoof is a fuzz pedal that takes the Hoof circuit and swaps its germanium transistors for four selected silicon transistors. The change gives cleaner cleans, higher gain, better temperature stability and a grittier, heavier fuzz, with more than four times the gain of the original Hoof. Key resistors are NOS carbon composition parts, adding some vintage character.

Four knobs shape the sound. Fuzz sets the amount of fuzz, Level sets the output volume, Tone moves from bass to treble, and Shift cuts or boosts the mids. Tone and Shift are re-voiced from the original for a smoother sweep and finer control over the low end. The maker specifically recommends trying the pedal with a bass guitar.

The pedal is true bypass with electronic relay-based switching, so no audio passes when it is unpowered. It runs from a 9 V battery or a 9 V DC supply with a 2.1 mm negative-center barrel plug, and should not be run at higher voltages. The pedal is built by hand in Akron, Ohio and is no longer in production.

Wideo

Specyfikacja

Marka
EarthQuaker Devices
Model
Cloven Hoof
Kategoria
Efekty i kostki

Controls

Shift
Mid content; clockwise for scooped mids, counterclockwise for boosted
Tone
Bass to the left, treble to the right
Level
Output volume
Fuzz
Clockwise for heavy, counterclockwise for light

Audio

Input impedance
150 kΩ
Output impedance
<10 kΩ
Transistors
4 selected silicon transistors
Key resistors
NOS carbon composition
Switching
True bypass, electronic relay-based
Unpowered behavior
Audio will not pass without power

Power

Battery
9 V battery
DC supply
9 V DC, 2.1 mm barrel, negative center
Current draw
14 mA
Voltage warning
Do not run at higher voltages

Physical

Dimensions (with knobs)
4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm)
Build
Handmade in Akron, Ohio, USA
Status
No longer in production

Dokumenty

PDF Instrukcja obsługiPDF · od producenta

Dane: earthquakerdevices.com; zdjęcia: EarthQuaker Devices product page · zaktualizowano 2026-10-13 · Widzisz błąd? Napisz do nas