Nostalgia
Nostalgia is a 10HP Eurorack module that works as a three-stage hybrid delay, built on the circuit of the maker's Erebus. It suits modular users who want a voltage-controlled echo with separate modular-level and guitar-level inputs.
- 3 echo circuits in series, based on the Erebus circuit
- Voltage-controlled delay time, 30 ms to 1 s
- Two feedback controls for different stages
- LFO with range control
- Separate outputs for stage 1 and stage 2
- Modular-level input plus an input for up to guitar-level signals
Fotók
7Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy Nostalgia modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
Nostalgia is a hybrid delay made of three echo circuits connected in series, derived from the Erebus circuit. Delay time can be voltage controlled over a range from 30 ms up to 1 second, and an LFO with its own range control can modulate the time.
Two separate feedback controls let the stages be treated differently. Stage 1 and stage 2 each have their own output, with the level of those outputs half that of the incoming signal, so intermediate echoes can be tapped and patched elsewhere.
There are two signal inputs: one for modular-level signals and another that accepts signals up to guitar level. The module is 10HP wide and only 35 mm deep, so it fits shallow cases. It draws 117 mA from the +12 V rail and 25 mA from the -12 V rail.
Videó
Műszaki adatok
- Márka
- Dreadbox
- Modell
- Nostalgia
- Kategória
- Szintetizátorok és billentyűsök › Moduláris (Eurorack)
Audio
- Type
- 3 stage hybrid delay
- Circuit basis
- Based on the Erebus circuit
- Echo circuits
- 3, in series
- Delay time range
- 30 ms up to 1 sec
- Delay time control
- Voltage controlled
Controls
- Feedback controls
- 2, for different stages
- LFO
- Yes, with range
Inputs
- Modular level input
- Separate input for modular level signals
- Guitar level input
- Separate input for signals up to guitar levels
Outputs
- Stage outputs
- Outputs for stage 1 and 2
- Stage output level
- 1/2 lower than the incoming signal
Power
- Current draw +12V
- 117 mA
- Current draw -12V
- 25 mA
Physical
- Width
- 10HP
- Depth
- 35 mm