PMA-1700NE
Two-channel integrated stereo amplifier rated at 70 W per channel into 8 ohms, with a built-in MM/MC phono stage and a USB DAC. Suited to hi-fi setups combining passive speakers, a turntable and digital sources.
- 70 W + 70 W into 8 ohms, 140 W + 140 W into 4 ohms
- Built-in MM/MC phono input
- USB-B DAC: PCM to 384 kHz/32-bit, DSD to 11.2 MHz
- Advanced AL32 Processing Plus, PCM1795 DAC
- 2 optical and 1 coaxial digital inputs
- Two speaker outputs with bi-wiring, no A/B switching
Photos
8Listings
No listings of this model yet
When someone sells a PMA-1700NE, the listings and the sales history will show here.
Sell one like thisDescription
The PMA-1700NE is a stereo integrated amplifier that drives passive loudspeakers only. It uses a single push-pull power stage with UHC-MOS devices and a dual EI-core power transformer. Output is 70 W per channel into 8 ohms and 140 W per channel into 4 ohms. Volume, balance and tone are electronically controlled through a potentiometer-operated interface, and Source Direct and Analog Mode switches are on the front panel.
Digital audio is handled by a PCM1795 DAC with Advanced AL32 Processing Plus. The rear USB-B input runs in asynchronous mode with full isolation and accepts PCM up to 384 kHz/32-bit and DSD up to 11.2 MHz. The unit is listed as Roon Tested. Two optical inputs and one coaxial input accept signals up to 192 kHz/24-bit.
Analog connections include a phono input switchable between MM and MC, CD and AUX line inputs, a recorder loop, an external pre input for using the power amp section alone, and two sets of gold-plated speaker terminals that support bi-wiring. A headphone output mutes the speakers when used. A system remote is supplied, and the amplifier can be controlled through a network player's app over the remote control bus. It has no Wi-Fi or HEOS.
Video
Specifications
- Brand
- Denon
- Model
- PMA-1700NE
- Category
- Hi-fi and home audio › Amplifiers
Audio
- Rated output power (8 ohm)
- 70W + 70W (20Hz-20kHz, THD 0.07%)
- Rated output power (4 ohm)
- 140W + 140W (1kHz, THD 0.7%)
- Frequency response
- 5Hz - 100kHz (0 to -3dB)
- Total harmonic distortion
- 0.01 % (Rated output: -3 dB), 8 ohm, 1 kHz
- Signal to noise ratio
- Phono MM 89dB, Phono MC 74dB, CD 107dB
- Tone control
- Bass 100Hz ±8dB, Treble 10kHz ±8dB
- Power amplifier circuit
- New UHC-MOS, Single Push Pull
- Power transformer
- Dual El Core
- DAC circuit
- PCM1795
- Digital processing
- Advanced AL32 Processing Plus
Inputs
- Phono input
- Yes (MM / MC), default MM
- Analog inputs / REC out (RCA)
- 4 / 1 (PHONO, CD, AUX, RECORDER)
- Optical inputs
- 2 (192kHz/24bit)
- Coaxial inputs
- 1 (192kHz/24bit)
- Line input sensitivity
- 125 mV / 19 kohm
- Phono sensitivity (MM)
- 2.5 mV / 47 kohm
- Power amp input
- 0.85V / 47kohm (EXT. PRE)
Connectivity
- USB-B (USB DAC)
- 1 (rear)
- USB PCM sample rate
- Up to 384kHz/32bit
- USB DSD (DoP)
- Up to 11.2MHz
- Speaker outputs
- 2 sets, bi-wiring, gold plated
- Speaker impedance
- A or B: 4 - 16 ohm; A+B: 8 - 16 ohm
- Headphone output
- 1 (speakers off when inserted)
- Remote control bus
- Yes (mini)
- Wi-Fi / HEOS
- No / No
Power
- Power consumption
- 295W
- Standby power
- 0.2W (TV autoplay off), 0.4W (TV autoplay on)
Physical
- Dimensions (W x D x H)
- 434 x 410 x 135mm (17.1 x 16.1 x 5.3in)
- Net weight
- 17.6kg (38.8lb)
- Front panel
- Aluminum
- Display
- OLED 128 x 100 dot
In the box
- Remote controller
- Yes, with AAA x2 batteries
- Power cord
- Yes