Cloudlifter CL-Zi
A passive-microphone activator and DI box that adds up to +25 dB of clean gain using Class-A discrete JFET circuitry. It has a variable impedance control and high-pass filter, and suits users of low-output mics, ribbon mics and instruments.
- Up to +25 dB of clean gain
- Vari-Z impedance control, 150 Ω to 15 kΩ
- Variable high-pass filter
- Output switch: +25 / +12 / +8 dB
- Combo XLR and 1/4" inputs
- Phantom-powered; does not pass phantom to the mic
Fotók
8Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy Cloudlifter CL-Zi modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The Cloudlifter CL-Zi combines a mic activator with a DI function. It gives passive microphones and instruments up to +25 dB of gain through patented Class-A discrete JFET circuitry, and it sits between the source and the preamp.
A continuously variable impedance control (Vari-Z) covers 150 Ω to 15 kΩ. It lets the user match or deliberately mismatch the source to the preamp to change tone. A variable high-pass filter works together with this control to reduce low frequencies. A three-position output switch offers +25 dB, +12 dB and +8 dB settings for sources of different levels.
Inputs are combo XLR/quarter-inch connectors, so both microphones and instruments can be connected. The unit runs on phantom power from the preamp, needing no batteries or external supply. It does not pass phantom power on to the microphone, so passive ribbon microphones are protected. The chassis is steel and the unit is handbuilt in Tucson, Arizona.
Videó
Műszaki adatok
- Márka
- Cloud Microphones
- Modell
- Cloudlifter CL-Zi
- Kategória
- Stúdió › Előerősítők és outboard
Inputs
- Input connectors
- Combo XLR and 1/4"
- Compatible sources
- Passive microphones (including ribbon) and instruments
- Variable impedance (Vari-Z)
- 150 Ω – 15 kΩ
Audio
- Maximum gain
- Up to +25 dB
- Output attenuation switch
- +25 dB / +12 dB / +8 dB
- Circuitry
- Patented Class-A discrete JFET
- High-pass filter
- Variable, interacts with Vari-Z control
- DI function
- Yes
Controls
- Vari-Z knob
- Continuously variable impedance
- Attenuation switch
- 3-position
- High-pass filter
- Switchable / variable
Power
- Power requirement
- Phantom power only
- Batteries / external supply
- Not required
- Phantom power pass-through
- No (protects passive ribbon mics)
Physical
- Construction
- Rugged steel
- Made in
- Handcrafted in Tucson, Arizona, USA
Warranty
- Warranty
- Limited lifetime warranty with registration