Cloudlifter CL-X
A passive-microphone activator that adds up to 36 dB of clean gain from phantom power alone, with a custom CineMag input transformer for added character. Intended for ribbon and other low-output passive mics used with quiet sources.
- Switchable +12 dB or +36 dB gain
- Custom CineMag input transformer
- Class-A discrete JFET circuitry
- Powered by +48 V phantom power only
- Does not pass phantom power to the mic
- Handcrafted in Tucson, Arizona
Zdjęcia
8Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi Cloudlifter CL-X, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The Cloudlifter CL-X sits between a passive microphone and a preamp or interface and raises the mic signal using discrete Class-A JFET circuitry. A custom CineMag input transformer is included to add colour and harmonic detail, and its response grows with the level of the source.
A two-position switch selects +36 dB for maximum gain on quiet sources, or +12 dB for louder sources such as drums and guitar amplifiers, where the transformer character is more pronounced. The input is loaded at 3 kOhm. The unit uses phantom power supplied by the preamp or interface, so it needs no batteries or external supply.
It connects with XLR in and out on Neutrik Gold connectors. It does not pass phantom power on to the microphone, so passive ribbon microphones are protected. The chassis is steel, and the unit is built by hand in Tucson, Arizona.
Wideo
Specyfikacja
- Marka
- Cloud Microphones
- Model
- Cloudlifter CL-X
- Kategoria
- Studio › Przedwzmacniacze i outboard
Audio
- Gain settings
- +12dB / +36dB
- Maximum gain
- Up to +36dB
- Circuitry
- Patented Class-A discrete JFET
- Input transformer
- Custom CineMag
- Input impedance loading
- 3Kohm (optimal)
- Compatible microphones
- Passive microphones, including ribbon and tube mics
Inputs
- Input connector
- Neutrik Gold XLR
- Gain switch
- Switchable +12dB / +36dB
Outputs
- Output connector
- Neutrik Gold XLR
- Phantom power pass-through
- No (phantom power is not passed to the microphone)
Power
- Power requirement
- Phantom power only (+48V)
- Batteries / external supply
- Not required
Physical
- Construction
- Rugged steel
- Design
- Rugged, portable
- Made in
- Handcrafted in Tucson, Arizona
Warranty
- Warranty
- Lifetime Limited (with registration)