Concerto V2.1
Moving-coil phono cartridge in a satin-finished wooden body, weighing 7.0 g, with 24-carat gold coils and a boron cantilever. It is aimed at turntable owners who want a high-output-accuracy MC cartridge in the maker's upper range.
- Moving-coil cartridge, 7.0 g total mass
- Output 0.5 mV at 5 cm/s
- 24-carat gold coils
- Boron cantilever, Prime Line diamond profile
- Recommended tracking force 2.8 g (±0.2 g)
- Satin wood body with metal inlay
Fotók
8Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy Concerto V2.1 modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The Concerto V2 is a moving-coil phono cartridge housed in a resonance-optimised satin wood body with a metal inlay. Inside, the available space holds 24-carat gold coils and the maker's patented magnetic circuit, with an absolutely pivot-point-symmetrical coil arrangement.
The stylus sits on a boron cantilever and uses a Prime Line diamond profile. The output is 0.5 mV at 5 cm/s, with a system impedance of 50 Ω, a frequency response of 20 Hz to 20 kHz and channel separation of 25 to 30 dB. Channel balance is under 0.5 dB, and tracking ability is given as 80 µm.
The recommended tracking force is 2.8 g (±0.2 g) and the total mass is 7.0 g. Stylus compliance is 15 µ/mN. As a low-output moving-coil design, it is intended for use with a phono stage that has an MC input. A two-year manufacturer warranty applies when the warranty card is returned within 14 days of purchase.
Videó
Műszaki adatok
- Márka
- Clearaudio
- Modell
- Concerto V2.1
- Kategória
- DJ-felszerelés › Hangszedők és tűk
Audio
- Cartridge type
- Moving coil (MC)
- Frequency response
- 20 Hz – 20 kHz
- Output voltage (at 5 cm/s)
- 0.5 mV
- Channel separation
- 25 – 30 dB
- Channel balance
- < 0.5 dB
- Tracking ability
- 80 µm
- System impedance
- 50 Ω
- Stylus compliance
- 15 µ/mN
Stylus and Coils
- Cantilever / diamond profile
- Boron / clearaudio Prime Line
- Coil arrangement
- Absolutely pivot-point symmetrical
- Coil material
- 24-carat gold
Setup
- Recommended tracking force
- 2.8 g (± 0.2 g)
Physical
- Weight of complete system
- 7.0 g
- Body
- Satin wood
- Material / colour
- Satin wood with metal inlay
Warranty
- Manufacturer warranty
- 2 years (warranty card must be returned within 14 days of purchase)