Concept MM V2
Moving-magnet phono cartridge with an aluminium body and elliptical diamond on an aluminium cantilever. It has a 3.3 mV output and suits turntable owners who want an MM cartridge for common tonearms.
- Moving-magnet cartridge with aluminium body
- Elliptical diamond on aluminium cantilever
- Output about 3.3 mV at 1 kHz, 5 cm/s
- Frequency response 20 Hz – 20 kHz
- Tracking force 2.2 g ± 0.3 g
- 2-year warranty with card returned within 14 days
Zdjęcia
5Ogłoszenia
Brak jeszcze ogłoszeń tego modelu
Gdy ktoś wystawi Concept MM V2, ogłoszenia i historia sprzedaży pojawią się tutaj.
Sprzedaj taki samOpis
The concept V2 is the aluminium-bodied model in Clearaudio's MM V2 cartridge series. Other cartridges in the series use hand-polished ebony bodies, while this one uses a resonance-optimised aluminium body. It carries an elliptical diamond on an aluminium cantilever, and its moving mass is kept low.
The moving-magnet cartridges are measured several times across four stages, analysed and hand-selected. This is meant to keep the two stereo channels closely matched and phase and transient distortion low. The nominal output is about 3.3 mV at 1 kHz and 5 cm/s, with a frequency response of 20 Hz to 20 kHz. The recommended tracking force is 2.2 g ± 0.3 g.
The cartridge connects to a turntable's tonearm through the headshell and to a phono stage designed for moving-magnet input. The recommended load is 47 kΩ with 100 pF capacitance. The series is described as working well with all common tonearms. The cartridge weighs 8.4 g.
Wideo
Specyfikacja
- Marka
- Clearaudio
- Model
- Concept MM V2
- Kategoria
- Hi-Fi i audio domowe › Gramofony
Audio
- Cartridge type
- Moving magnet (MM)
- Frequency response
- 20 Hz – 20 kHz
- Output voltage (1 kHz, 5 cm/s)
- ~ 3.3 mV
- Channel separation (1 kHz)
- 20 dB
- Channel balance (1 kHz)
- 2 dB
- Tracking ability
- 80 µm
- Stylus compliance
- 15 µ/mN
Stylus
- Cantilever / diamond cut
- Aluminium / elliptical
- Recommended tracking force
- 2.2 g ± 0.3 g
Electrical
- Coil impedance (1 kHz)
- 0.66 kΩ
- Coil inductance
- 400 mH
- Load resistance
- 47 kΩ
- Capacitive load
- 100 pF
Physical
- Weight
- 8.4 g
- Weight of complete system
- 8.6 g (± 0.2 g)
- Body material
- Aluminium
Warranty
- Manufacturer warranty
- 2 years (guarantee card returned within 14 days of purchase)