Concept MM V2
Clearaudio Már nem gyártják

Concept MM V2

Moving-magnet phono cartridge with an aluminium body and elliptical diamond on an aluminium cantilever. It has a 3.3 mV output and suits turntable owners who want an MM cartridge for common tonearms.

  • Moving-magnet cartridge with aluminium body
  • Elliptical diamond on aluminium cantilever
  • Output about 3.3 mV at 1 kHz, 5 cm/s
  • Frequency response 20 Hz – 20 kHz
  • Tracking force 2.2 g ± 0.3 g
  • 2-year warranty with card returned within 14 days
Eladok egy ilyet

Fotók

5

Hirdetések

Ehhez a modellhez még nincs hirdetés

Ha valaki elad egy Concept MM V2 modellt, itt jelennek meg a hirdetések és az eladási előzmények.

Eladok egy ilyet

Leírás

The concept V2 is the aluminium-bodied model in Clearaudio's MM V2 cartridge series. Other cartridges in the series use hand-polished ebony bodies, while this one uses a resonance-optimised aluminium body. It carries an elliptical diamond on an aluminium cantilever, and its moving mass is kept low.

The moving-magnet cartridges are measured several times across four stages, analysed and hand-selected. This is meant to keep the two stereo channels closely matched and phase and transient distortion low. The nominal output is about 3.3 mV at 1 kHz and 5 cm/s, with a frequency response of 20 Hz to 20 kHz. The recommended tracking force is 2.2 g ± 0.3 g.

The cartridge connects to a turntable's tonearm through the headshell and to a phono stage designed for moving-magnet input. The recommended load is 47 kΩ with 100 pF capacitance. The series is described as working well with all common tonearms. The cartridge weighs 8.4 g.

Videó

Műszaki adatok

Márka
Clearaudio
Modell
Concept MM V2
Kategória
Hi-Fi és otthoni hang › Lemezjátszók

Audio

Cartridge type
Moving magnet (MM)
Frequency response
20 Hz – 20 kHz
Output voltage (1 kHz, 5 cm/s)
~ 3.3 mV
Channel separation (1 kHz)
20 dB
Channel balance (1 kHz)
2 dB
Tracking ability
80 µm
Stylus compliance
15 µ/mN

Stylus

Cantilever / diamond cut
Aluminium / elliptical
Recommended tracking force
2.2 g ± 0.3 g

Electrical

Coil impedance (1 kHz)
0.66 kΩ
Coil inductance
400 mH
Load resistance
47 kΩ
Capacitive load
100 pF

Physical

Weight
8.4 g
Weight of complete system
8.6 g (± 0.2 g)
Body material
Aluminium

Warranty

Manufacturer warranty
2 years (guarantee card returned within 14 days of purchase)

Adatok: clearaudio.de; fotók: Clearaudio product page · frissítve: 2026-10-14 · Hibát találtál? Írj nekünk