Minx Min 12
Compact Minx Min 12 satellite speaker with two balanced mode radiator drivers in a gloss ABS cabinet roughly the size of a Rubik's Cube. Sold singly, it suits small stereo, desktop, multi-room or home-cinema setups, and is made to pair with a Minx subwoofer.
- 2 x 4th-gen balanced mode radiator drivers
- 180° sound dispersion
- Lacquered ABS cabinet with die-cast aluminium reinforcements
- Binding posts for banana plugs or bare wire
- 78 x 78 x 85mm, 0.43kg
- Sold individually; pairs with Minx subwoofers
Fotografije
8Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal Minx Min 12, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The Min 12 is a very small passive speaker built around two 4th-generation balanced mode radiator (BMR) drivers. The drivers give wide, 180° dispersion, so the sound stays consistent across the room instead of depending on one listening position. The cabinet is lacquered ABS with die-cast aluminium reinforcements and comes in high gloss black or high gloss white.
It is sold individually, so two units are needed for stereo, and more can be used for surround. It is intended to be combined with a Minx subwoofer to cover the low end, since the stated frequency response starts at 150Hz. Typical uses are a discreet home theatre, a multi-room system or a desktop setup.
Connection is through binding posts that take banana plugs or bare wire, and the speaker is compatible with 8 ohm amplifiers rated at 25 to 200W. For mounting it works with flush wall brackets, floor stands, table stands and adjustable wall brackets.
Video
Specifikacije
- Znamka
- Cambridge Audio
- Model
- Minx Min 12
- Kategorija
- Hi-Fi in domači avdio › Zvočniki
Audio
- Drivers
- 2 x Balanced Mode Radiator drivers
- Driver type
- 4th-gen BMR
- Sensitivity (SPL)
- 86dB (2.83 Vrms input)
- Frequency response
- 150Hz-20kHz
- Impedance
- 8 Ohms compatible
- Sound dispersion
- 180°
- Recommended amp power
- 25 - 200W
Connectivity
- Speaker terminals
- Binding posts (banana plugs or bare wire)
Physical
- Dimensions (W x H x D)
- 78 x 78 x 85mm (3.1 x 3.1 x 3.3")
- Weight
- 0.43kg (0.95lbs)
- Enclosure
- Lacquered high gloss ABS with die-cast aluminium reinforcements
- Finishes
- High gloss black or High gloss white
- Mounting options
- Flush wall brackets, floor stands, table stands, adjustable wall brackets
In the box
- Contents
- 1x speaker