Melomania 1

True wireless Bluetooth 5.0 earbuds with 5.8mm graphene-enhanced drivers and aptX, AAC and SBC support, for everyday listening and calls. Each earbud weighs 4.6g, and the charging case adds extra charges. The model is listed as archived.

Bluetooth 5.0 with aptX, AAC and SBC codecs
5.8mm graphene-enhanced drivers, 20Hz–20kHz
9 hours per charge, 45 hours with case
IPX5 water spray resistance, earbuds and case
4.6g per earbud, 46.2g total with case
MEMS microphone with cVc noise cancellation

Photos

Listings

No listings of this model yet

When someone sells a Melomania 1, the listings and the sales history will show here.

Sell one like this

Description

The Melomania 1 is a pair of true wireless in-ear headphones built around 5.8mm graphene-enhanced drivers. Bluetooth 5.0 (Class 2) carries audio using aptX, AAC or SBC. A Qualcomm QCC3026 chip and a triple-core processor design handle the audio processing, and latency is quoted at 70 ms. Frequency response is 20Hz to 20kHz, with total harmonic distortion below 0.04% at 1kHz and 1mW.

Each earbud plays for about 9 hours of continuous A2DP playback. The charging case holds four further charges, for 36 hours extra and 45 hours in total, and recharges over Micro-USB. The earbuds and case are rated IPX5 against water spray. A MEMS microphone with cVc noise cancellation handles calls, and Siri or Google Assistant can be used for voice control.

The earbuds weigh 4.6g each and the case 37g. They come in Black and Stone matte finishes, with silicone and memory foam tips in several sizes in the box. The product page marks the model as archived.

Video

Specifications

Brand: Cambridge Audio
Model: Melomania 1
Category: Headphones

Connectivity

Bluetooth version: Bluetooth 5.0, Class 2
Supported profiles: A2DP, AVRCP, HSP, HFP
Supported codecs: aptX™, AAC, SBC
Latency: 70mS
Voice control: Yes: Siri (iOS) / Google Assistant (Android)

Audio

Driver: 5.8mm Graphene-enhanced Diaphragm
Frequency response (earbuds): 20Hz – 20kHz
Total harmonic distortion: <0.04% @1kHz 1mW
Processor: Triple-core Processor Architecture: Dual-core 32-bit processor application subsystem & Qualcomm QCC3026 Single-core 120Mhz Kalimba DSP audio subsystem

Microphone

Microphone: MEMS with cVc™ Noise Cancellation
Microphone sensitivity: 96dB SPL at 1kHz
Frequency response (microphone): 100 Hz to 8 kHz

Power

Battery play time (earbuds): 9 Hours (Continuous A2DP Playback)
Battery play time (charging case): 36 Hours (An Additional 4 Earbud Charges)
Battery play time (total): 45 Hours (9 + 36)
Charging time (case): Approx. 15mins/60mins/90mins
Standby time (from full charge): Approx. 1 Year
Power supply: 5V, 500 mA (or greater): USB charging (Micro-USB cable supplied)

Physical

IPX rating: IPX5 (Water Spray Resistant (Earbuds & Case))
Operating temperature: 0°C to +40°C / 32°F - 104°F
Operating relative humidity: 10 to 80%, Non-condensing
Dimensions: Charging case: 59 x 50 x 22mm; Earphones: 27 x 15mm
Weight: Earbud: 4.6g each (9.2g both Earbuds); Charging Case: 37g; Total: 46.2g
Colour / finish: Black: Matte UV lacquer; Stone: Matte UV lacquer

In the box

Box contents: Earbuds (2 pcs); Silicone Tips: Small (2pcs) / Medium (2pcs - attached to Earbuds) / Large (2pcs); Memory Foam Tips: Medium (2pcs); Charging Case; Micro-USB Charging Cable (31cm); User Manual (EN, FR, DE, IT, SE, Chinese Simplified, Chinese Traditional, JP, KR); Great Fit Earbud Fitting Instructions

Data: cambridgeaudio.com; photos: Cambridge Audio product page · updated 2026-10-11 · Found a mistake? Write to us