Marine 6
Marine 6 is a compact two-way marine loudspeaker with a 25mm soft dome tweeter and a 150mm polypropylene bass/midrange driver, rated IP66. It is aimed at boat owners and installers who need a weather-resistant speaker for shallow-depth mounting.
- Two-way marine speaker, sold as a pair
- 25mm soft dome tweeter, 150mm polypropylene woofer
- IP66 rating when installed
- Marine-grade stainless steel chassis and grille
- Needs 88mm mounting depth, 200mm cut-out
- Black or white finish
Fotografije
5Oglasi
Za ovaj model još nema oglasa
Kad netko bude prodavao Marine 6, ovdje će se prikazati oglasi i povijest prodaje.
Prodaj ovakavOpis
Marine 6 pairs a 25mm (1-in) soft dome tweeter with a 150mm (6-in) polypropylene cone bass/midrange driver in a two-way design. It covers 55Hz to 30kHz, with a sensitivity of 89dB (2.83V, 1m) and an 8Ω nominal impedance. The recommended amplifier power is 20W to 80W.
The chassis and grille are marine-grade stainless steel, and the drivers use polypropylene. When installed, the speaker has an IP66 rating, so it is intended to withstand soaking, salt-water spray and hose-down washing. It is the more compact of the two Marine models, needing a mounting depth of 88mm (3.5-in) and a cut-out of 200mm (7.8-in).
Marine 6 is a passive speaker sold as a pair and is intended for custom installation. A C6 pre-mount kit is listed as an accessory. The 6C back box is also listed but is not suitable for marine applications. It is available in black or white finishes.
Videozapis
Specifikacije
- Marka
- Bowers & Wilkins
- Model
- Marine 6
- Kategorija
- Hi-Fi i kućni audio › Zvučnici
Audio
- Design
- 2-way system
- Frequency range
- 55Hz – 30kHz
- Sensitivity
- 89dB (2.83V, 1m)
- Nominal impedance
- 8Ω
- Recommended amplifier power
- 20W – 80W
Drive units
- Tweeter
- 1x Ø25mm (1-in) soft dome
- Bass/midrange
- 1x Ø150mm (6-in) polypropylene cone
Physical
- Mounting depth
- 88mm (3.5-in)
- Cut-out
- 200mm (7.8-in)
- Ingress protection
- IP66 (when installed)
- Chassis and grille
- Marine-grade stainless steel
- Finishes
- Black, White
Accessories
- Pre-mount kit
- C6
- Back box
- 6C (not suitable for marine applications)
- Sold as
- Pair