beyerdynamic DT 30 IE
beyerdynamic Għall-bejgħ

beyerdynamic DT 30 IE

Beyerdynamic DT 30 IE – Stage In-Ear Monitors for the Gig

  • 11mm Dynamic Driver
  • Up to 39dB Isolation
  • IP54 Stage-Proof
  • Replaceable MMCX Cable

Ritratti

5

Reklami

Għad m’hemmx reklami ta’ dan il-mudell

Meta xi ħadd ibigħ beyerdynamic DT 30 IE, ir-reklami u l-istorja tal-bejgħ jidhru hawn.

Biegħ wieħed bħal dan

fil-ħanut ta’ Soundium · €119

Deskrizzjoni

Beyerdynamic DT 30 IE – Stage In-Ear Monitors for the Gig

Overview

The Beyerdynamic DT 30 IE is a wired in-ear monitor for musicians who need stage-ready sound without the boutique price. A single 11mm dynamic driver delivers a balanced, full-range tuning, while IP54 housings and a replaceable Kevlar-reinforced cable handle the realities of live performance.

Key Features

  • 11mm Dynamic Driver: Balanced, full-range tuning from 5Hz to 20,000Hz that works across instruments and vocals.
  • Up to 39dB Passive Isolation: Seals out stage noise so you hear your monitor mix, not the room.
  • IP54 Durability: Dust and splash resistant from any direction, so sweat under the lights and outdoor drizzle are not a problem.
  • Replaceable MMCX Cable: When the cable wears out you swap it, not the whole pair. Detachable 1.4m Kevlar-reinforced cable with a gold-plated 3.5mm plug.
  • 2.7g Per Earpiece: Light enough to wear through a full set, with memory wire that hooks securely over the ear.
  • Six Sets of Tips: Three silicone and three foam pairs in small, medium and large for a tight seal.

Customer Benefits

On stage the DT 30 IE keeps your monitor mix clean while the band and the front row stay out of your ears. The balanced tuning means you can use one pair whether you sing, play guitar or sit behind the kit, and the sealed fit holds isolation through a loud set. Because the cable detaches over MMCX, the most common failure point is a cheap fix instead of a new set of in-ears. It is a practical first IEM and a durable backup that lives in the gig bag.

Quick Specs

  • Driver: 11mm dynamic, closed
  • Frequency Response: 5Hz – 20,000Hz
  • Impedance: 18 Ω
  • Sensitivity: 111dB SPL @ 1mW / 1kHz (128dB @ 1Vrms)
  • Maximum SPL: 137dB
  • Total Harmonic Distortion: 0.08% @ 500Hz, 0.09% @ 1kHz
  • Sound Isolation: Up to 39dB passive
  • Ingress Protection: IP54 (dust and splash resistant)
  • Weight: 2.7g per earpiece
  • Cable: Detachable 1.4m Kevlar-reinforced, MMCX, gold-plated 3.5mm 3-pole plug

In the Box

  • 1 x Beyerdynamic DT 30 IE In-Ear Monitors
  • 1 x Detachable 1.4m Cable (MMCX, 3.5mm plug)
  • 3 x Pairs Silicone Ear Tips (S / M / L)
  • 3 x Pairs Foam Ear Tips (S / M / L)

✅ Pros:

  • Stage-ready durability with IP54 and a replaceable cable
  • Strong passive isolation for a sealed monitor mix
  • One balanced tuning that suits any instrument
  • Light, secure fit for full sets

⚠️ Cons:

  • Single fixed tuning, not instrument-specific like the DT 70 IE series
  • One dynamic driver, not a multi-driver reference IEM

If you want a tough, honest stage monitor that will not drain the gear budget, the DT 30 IE earns its place in the bag.

Speċifikazzjonijiet

Marka
beyerdynamic
Mudell
DT 30 IE
Kategorija
Headphones
Tip
In-Ear
Firxa ta’ frekwenza
5 – 20 000 Hz
Sensittività
111 dB
Impedenza
18 Ω
Piż
2.7 g per earpiece
Stil
Closed-back
Teknoloġija
Dynamic

Dokumenti

PDF Manwal tal-utentPDF · mill-manifattur

Verżjonijiet u kuluri

Mudelli simili

Data: il-katalgu ta’ Soundium · aġġornat 2026-10-05 · Sibt żball? Iktbilna