FBQ6200HD
A stereo 31-band graphic equalizer with a built-in feedback detection system that lights the fader of the affected band. It suits live sound engineers and recording users who need EQ with a subwoofer crossover and per-channel filters.
- 31-band graphic EQ per channel, stereo
- FBQ Feedback Detection lights the fader to lower
- Sweepable high-cut and low-cut filters per channel
- Switchable limiter per channel with threshold control
- Subwoofer output, cut-off adjustable 30–200 Hz
- Built-in pink noise generator for spectrum analysis
Fotografije
5Oglasi
Oglasov za ta model še ni
Ko bo kdo prodajal FBQ6200HD, se bodo tu prikazali oglasi in zgodovina prodaj.
Prodaj takšnegaOpis
The FBQ6200HD is a two-channel graphic equalizer with 31 bands per channel and 45 mm long-throw faders. Its FBQ Feedback Detection System senses feedback in a given frequency range and lights the LED on the matching fader, showing which band to pull down.
Each channel has sweepable high-cut and low-cut filters for removing rumble, room resonance and hum, plus a switchable limiter with its own threshold control. A built-in crossover provides a dedicated subwoofer output with an adjustable cut-off from 30 to 200 Hz. A pink noise generator lets the unit work as a spectrum analyzer for system tuning. Signal paths use 4580 dual operational amplifiers.
Balanced XLR outputs allow direct connection to power amplifiers or active subwoofers. The two channels can serve as a stereo front-of-house EQ, or one side can handle mono FOH while the other equalizes monitors.
Video
Specifikacije
- Znamka
- Behringer
- Model
- FBQ6200HD
- Kategorija
- Ozvočenje › Drugo ozvočenje
Audio
- Type
- High-definition stereo graphic equalizer
- EQ bands per channel
- 31
- Channels
- 2 (stereo)
- Operational amplifiers
- 4580 dual op-amps
- Feedback detection
- FBQ Feedback Detection System
Filters and dynamics
- High-cut filter
- Variable, sweepable frequency, each channel
- Low-cut filter
- Variable, sweepable frequency, each channel
- Limiter
- Switchable on each channel
- Limiter threshold
- Separate control per channel
Controls
- Frequency faders
- 45 mm long-throw
- Fader feedback indicator
- LED on each EQ fader
- Pink noise generator
- Built-in, for use as spectrum analyzer
Outputs
- Output connectors
- Balanced XLR
- Subwoofer output
- Dedicated
- Built-in crossover cut-off
- 30 – 200 Hz, adjustable
Applications
- Stereo mode
- Stereo front-of-house EQ
- Dual-mono mode
- One side mono FOH, other side monitors