676· Преампове и аутборд
A 2U rackmount channel strip that combines a mic/line tube preamp with a FET-style compressor, modelled on the classic 6176 design. It suits engineers recording vocals and instruments who want tube colour, Midas transformers and fast dynamic control.
- Mic/line tube preamp plus FET-style compressor
- Custom-built Midas transformers
- 12AX7/ECC83S and 12AT7/6072 tubes
- Attack 20 to 800 microseconds
- Release 50 to 1100 milliseconds
- Join/Split switch for independent preamp use
Снимки
6Обяви
Още няма обяви за този модел
Когато някой продаде 676, обявите и историята на продажбите ще се показват тук.
Продай такъвОписание
The 676 pairs a tube mic/line preamp with a FET compressor in a single 2U rack chassis. The signal path uses custom-built Midas transformers and two tube types, 12AX7/ECC83S and 12AT7/6072. It is based on the 6176 channel strip design.
The preamp section has controls for input gain, impedance and polarity, plus a high or low frequency shelf and high or low boost/cut. A Join/Split switch lets the preamp run on its own, and the preamp and compressor can be wired up independently of each other.
The compressor has an attack time of 20 to 800 microseconds and an adjustable release of 50 to 1100 milliseconds. A vintage-style meter shows gain reduction and output level. Settings range from slow, smooth levelling for vocals to fast, aggressive action for drums and bass. The chassis can sit in a rack case for location recording or live sound.
Видео
Спецификации
- Марка
- Behringer
- Модел
- 676
- Категория
- Студио › Преампове и аутборд
Audio
- Type
- Classic vacuum tube preamplifier and FET-style compressor
- Transformers
- Custom-built Midas transformers
- Preamp tubes
- 12AX7/ECC83S and 12AT7/6072
- Design basis
- Classic 6176 tube mic preamp and FET compressor
Preamp
- Input types
- Mic/line
- Input gain
- Adjustable
- Impedance
- Selectable
- Polarity
- Switchable
- Shelving EQ
- High or low frequency shelf
- Boost/cut
- High or low boost/cut
Compressor
- Compressor type
- FET-style
- Attack time
- 20 to 800 microseconds
- Release time
- 50 to 1100 milliseconds
- Metering
- Vintage-style meter showing gain reduction and output level
Routing
- Join/Split switch
- Operates the preamp independently of the compressor
- Independent wiring
- Preamp and compressor can be wired up independently
Physical
- Chassis
- 2U rackmount
- Rack use
- Fits a rack case for location recording or live sound