softPop SP2
Softpop SP2 is a portable semi-modular subtractive synthesizer with a digital sequencer and scale quantizer, made by Bastl Instruments with Casper Electronics. It suits experimental players who want sequenced melodies, noise, or an external-audio processor with a 37-point patchbay.
- Digital oscillator with several waveforms and waveshaping
- State variable filter with lowpass, bandpass and highpass modes
- 8-step sequencer, 8 patterns per bank, 8 banks
- 8 user-editable quantizer scales, 8 playback modes, 8 FX
- 37-point Eurorack-compatible patchbay
- 5V Micro USB power, under 250mA
Billeder
5Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en softPop SP2, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
Softpop SP2 pairs a modular-style synth voice with a digital brain. The voice has a digital oscillator with several waveforms and waveshaping, a state variable filter (lowpass, bandpass, highpass) with a POP cross-modulation control, a cycling attack-decay envelope and a VCA that works in drone or envelope mode. A light orb sits on the panel.
The sequencer plays 8-step patterns of notes, gates and slides, with 8 patterns per bank and 8 banks. It adds 8 user-editable quantizer scales, 8 playback modes and 8 temporary performance FX such as ratchets and arps, and each of these can be chained. Firmware v1.3 adds direct step editing, gate recording and step pitch preview.
An external input with gain and saturation sends outside audio through the filter, VCA and overdrive, and an envelope follower can drive modulation. A 37-point Eurorack-compatible patchbay, analog sync input and MIDI input handle integration. Power comes from 5V over Micro USB or a 16-pin Eurorack connector.
Video
Specifikationer
- Mærke
- Bastl Instruments
- Model
- softPop SP2
- Kategori
- Synths og keyboards › Synthesizere
Synth engine
- Oscillator
- Digital VCO with several waveforms and waveshaping
- Filter
- State variable resonant filter (lowpass, bandpass, highpass)
- Filter character control
- POP cross-modulation
- Envelope
- Attack-decay, cycling
- VCA modes
- Drone or envelope
- Pitch quantization
- Quantized V/OCT semitone transpose
Sequencer
- Steps per pattern
- 8
- Patterns per bank
- 8
- Banks
- 8 (saved on demand)
- Scales
- 8 user-editable
- Playback modes
- 8
- Performance FX
- 8
- Per-step options
- Envelope gate, slide
Inputs
- Patch points
- 37 Eurorack-compatible
- External audio input
- Yes, with gain, saturation and dynamics analyzer
- Sync input
- Analog sync
Connectivity
- MIDI
- MIDI input for sync and musical control
- Eurorack power connector
- 16-pin protected, 5V from busboard, <250mA
Outputs
- Output level
- 5Vpp (PULSE, EDGE, ENV, BP and DYNAMICS 4Vpp)
- Sequencer outputs
- CV, gate and clock
Power
- Power supply
- 5V via Micro USB
- Power consumption
- <250mA
Physical
- Dimensions
- 173 x 112 x 41 mm
Software
- Latest firmware
- Digital VCO v1.3 (07/2025)
In the box
- Contents
- Softpop SP2, quickstart guide, rubber feet, sticker
- Patch cables
- 5 x 15 cm (green, dark green, brown, black, white)
- USB cable
- Micro USB cable (power supply not included)