D1P
Compact USB-powered DAC and headphone amplifier with USB-C and optical inputs, a 3.5 mm headphone output and stereo RCA line output. It suits listeners who want better sound from phones, laptops or TVs, at a desk or on the move.
- ESS ES9219C DAC; PCM up to 32-bit/384 kHz
- DSD64/128 (DoP) and DSD256 native; MQA rendering
- USB-C and optical inputs; optical has priority
- 3.5 mm headphone and RCA outputs, toggle switch
- Drives 10–600 ohm headphones; SNR 121 dB
- USB bus powered; works with iOS, Android, macOS, Windows
Billeder
8Annoncer
Ingen annoncer for denne model endnu
Når nogen sælger en D1P, vises annoncerne og salgshistorikken her.
Sælg sådan enBeskrivelse
The D1P is a small external DAC and headphone amplifier that takes over digital-to-analog conversion from the host device's own sound hardware. It uses an ESS ES9219C converter with a Savitech SA9312 USB controller and handles PCM up to 32-bit/384 kHz, DSD up to DSD256 (native) and MQA, with built-in MQA rendering.
It has a USB-C input for computers and phones and an S/PDIF optical (TOSLINK) input for TVs and similar sources, limited to 24-bit/192 kHz. When both are connected, optical takes priority. A toggle switch sends the signal to either the 3.5 mm headphone jack or the RCA stereo output for powered speakers or an amplifier. Headphones from 10 to 600 ohms are supported.
Power comes over USB 5 V, so no battery or external supply is needed; any 5 V USB supply can power it when used with optical. An indicator light changes colour to show the sample rate or format. It works with iOS, Android, macOS and Windows, and a USB-C cable and Lightning-to-USB-C cable are supplied.
Video
Specifikationer
- Mærke
- Audioengine
- Model
- D1P
- Kategori
- Hi-Fi og hjemmelyd › Forstærkere
Inputs
- USB input
- USB Type-C
- Optical input
- S/PDIF optical (TOSLINK), max 24bit 192KHz
- Input selection
- Toggle switch
Outputs
- Headphone output
- Standard 3.5mm headphone port
- Line output
- RCA stereo
- Full-scale output level
- Max. 2.05Vrms @ 10K default
- Output impedance
- <0.5R @ Headphone, 47R @ RCA
- Recommended headphone impedance
- 10 Ohms ~ 600 Ohms
Audio
- DAC chip
- SA9312+ES9219C
- Input bit depth
- Up to 32 bits
- Sample rate (USB)
- PCM Max. 32bit 384KHz, Max 24bit 192KHz
- DSD support
- DSD 64, 128 (DOP), DSD 256 (Native)
- MQA rerender
- 8X
- Supported formats
- MQA, FLAC, PCM, DSD
- Frequency response
- 20Hz-40KHz +/-0.1dB
- Signal-to-noise ratio
- 121dB (10K)
- USB device class
- UAC 2.0
Connectivity
- Works with
- Android, iOS, MacOS, Windows
Power
- Power requirement
- USB 5V DC
- Consumption
- ~102mA (normal), ~121mA (pink noise at 50% volume, 32bit 384KHz)
Physical
- Dimensions
- 3.0" (7.62 cm) x 2.5" (6.35 cm) x 1" (2.5 cm)
- Shipping weight
- 13.7 oz (0.39kg)
- Operating temperature
- 32 to 95 degrees F
- Non-operating temperature
- -4 to 113 degrees F
- Relative humidity
- 5% to 95% non-condensing
In the box
- Cables
- USB-C cable, Lightning to USB-C cable
- Other
- Microfiber product bag, setup guide