D1· Amplifikaturi
Compact aluminium USB-C and optical DAC with a headphone amplifier, built for desktop use with computers, TVs and media players. It feeds headphones and powered speakers or AV receivers and takes its power from the USB connection.
- 32-bit DAC based on the ESS9018 converter
- USB-C and optical (TOSLINK/SPDIF) digital inputs
- Stereo RCA outputs plus front headphone output
- Powered over USB, no external power supply
- Plug and play on macOS, Windows and iOS, no drivers
- Suited to headphones from 20 to 300 ohms
Ritratti
5Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ D1, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The D1 is an external 32-bit DAC and headphone amplifier meant to replace a computer's built-in sound card. It takes digital audio over USB-C or optical (TOSLINK/SPDIF), converts it with an ESS9018 chip and sends it to a front headphone output and a pair of stereo RCA outputs for powered speakers or an AV receiver.
The headphone stage is based on an ES9601C SABRE low-noise op-amp. The maker suggests headphones between 20 and 300 ohms as the best match, and reports that some users run 600 ohm models. A front volume control sets the level, and volume can also be adjusted from the computer. Optical input is a fixed output, so a TV remote cannot change the level. The case is aluminium and the RCA connectors are audiophile-grade.
The unit is powered over USB, so no external supply is needed. It works with macOS, Windows and iOS without drivers or apps; on a Mac the D1 is selected in the Sound settings. Android 5.0 or later can be used through a USB OTG cable. A USB cable is included.
Vidjo
Speċifikazzjonijiet
- Marka
- Audioengine
- Mudell
- D1
- Kategorija
- Hi-Fi u awdjo tad-dar › Amplifikaturi
Inputs
- Inputs
- USB C/Optical (SPDIF)
- USB input
- USB C
- Optical input
- Optical / TOSLINK
Outputs
- Outputs
- RCA stereo/3.5mm headphone
- Stereo output
- RCA
- Headphone output
- 3.5mm
- Volume control
- Yes
Audio
- DAC type
- Dual Mode USB C and Optical (SPDIF)
- D/A converter
- ESS9018
- Input bit depth
- 32-bit
- Headphone amplifier
- ES9601C SABRE low noise opamp
- Headphone impedance
- 10 ohms to 600 ohms
- Supported formats
- PCM, DSD
Connectivity
- Platform compatibility
- iOS, MacOS, Windows
- Drivers
- No special software, apps or drivers required
Power
- Power source
- USB bus (computer or any USB port)
Physical
- Case
- Aluminum
- Portability
- Desktop
In the box
- Amplifier and DAC
- 1 x D1
- USB cable
- 1
- Microfiber product bag
- 1
- Setup guide
- 1