LCD-4z
Open-back planar magnetic over-ear headphone with a 106 mm driver and a low 15-ohm impedance, designed to be driven directly from most devices with a headphone jack. A lighter magnesium-chassis revision of the LCD-4, now listed as a legacy product.
- Open-back planar magnetic, 106 mm Nano-Scale Uniforce driver
- Double Fluxor magnet array with Neodymium N50 magnets
- 15 ohm impedance, 98 dB/1mW sensitivity
- Cast magnesium chassis, 560 g, over 20% lighter than LCD-4
- 2.5 m 4-pin XLR cable with 1/4" and 3.5mm adapters
- Listed by the maker as a legacy product
Fotók
5Hirdetések
Ehhez a modellhez még nincs hirdetés
Ha valaki elad egy LCD-4z modellt, itt jelennek meg a hirdetések és az eladási előzmények.
Eladok egy ilyetLeírás
The LCD-4z is an open-back, over-ear planar magnetic headphone built around a 106 mm Nano-Scale Uniforce diaphragm and a double Fluxor magnet array with N50 neodymium magnets. Its 15-ohm impedance and 98 dB/1mW sensitivity let it work from a wide range of sources without a dedicated headphone amplifier, though a minimum of more than 100 mW is recommended, and more than 250 mW for the recommended power level.
The chassis and yokes are cast magnesium, which makes the headphone over 20% lighter than the original LCD-4, at 560 g. Other construction details include a carbon fiber suspension headband, a ventilated leather headstrap, leather ear cushions and gold-accented panels and hardware. Each unit is assembled and tested in the maker's California workshop.
The supplied 2.5 m braided cable uses directional OCC copper and terminates in a 4-pin balanced XLR. A 4-pin XLR to 1/4" adapter and a 1/4" to 3.5mm adapter are included for single-ended use, along with a travel case and warranty documents.
Videó
Műszaki adatok
- Márka
- Audeze
- Modell
- LCD-4z
- Kategória
- Fejhallgatók
Audio
- Style
- Over-ear, open-back
- Transducer type
- Planar Magnetic
- Magnetic structure
- Double Fluxor™ magnet array
- Phase management
- Fazor™
- Magnet type
- Neodymium N50
- Diaphragm type
- Nano-Scale Uniforce™
- Transducer size
- 106 mm
- Frequency response
- 5Hz - 50kHz
- Maximum SPL
- >130dB
- THD
- <0.1% @ 100 dB SPL
Electrical
- Sensitivity
- 98 dB/1mW (at Drum Reference Point)
- Impedance
- 15 ohms
- Min recommended power
- >100mW
- Recommended power level
- >250mW
Connectivity
- Cable
- Premium braided 2.5m, 4-pin XLR balanced
- Adapters
- 4-pin XLR to 1/4"; 1/4" to 3.5mm
Physical
- Weight
- 560g
- Chassis
- Cast magnesium
- Headband
- Carbon fiber suspension
In the box
- Included
- LCD-4z headphone, 2.5m 4-pin XLR cable, adapters, travel case, certificate of authenticity and warranty cards