Dirty Mirror
A three-footswitch, 15-knob dual parallel fuzz pedal that combines two fuzz circuits with a short delay stage placed before them. It suits players who want extreme, noisy fuzz textures along with slapback, chorus and vibrato effects.
- Dual parallel fuzz with Burn and Churn channels
- Burn channel: nastier FY-6 variant (Chemical Burn circuit)
- Churn channel: heavily modded Big Muff Pi
- Short delay before fuzz; dry, wet or blend per channel
- Delay time modulated by envelope follower or LFO
- 3 footswitches, 15 knobs; 9-12V DC, min. 250mA
Ritratti
8Reklami
Għad m’hemmx reklami ta’ dan il-mudell
Meta xi ħadd ibigħ Dirty Mirror, ir-reklami u l-istorja tal-bejgħ jidhru hawn.
Biegħ wieħed bħal danDeskrizzjoni
The Dirty Mirror runs two fuzz channels side by side. The Burn channel on the left is built on a nastier variant of the FY-6 fuzz circuit, and the Churn channel on the right is built on a heavily modified Big Muff Pi. The core circuit comes from the maker's Coma Reactor Eurorack module.
A short delay circuit sits ahead of both fuzzes. Each fuzz can be fed the dry input, a fully wet delayed signal, or a blend of the two. The two fuzz outputs are mixed in parallel into an output section with high headroom. The delay time can be modulated by an envelope follower or an LFO, which allows anything from straight dual fuzz to seasick vibrato and slow, phasey quasi-chorus sounds. The delay can also be used alone for slapback, chorus and vibrato.
The pedal has three footswitches and 15 knobs. It is powered by a 9-12V DC supply of at least 250mA. The maker warns that it can get very noisy and that the noise cannot be reduced.
Vidjo
Speċifikazzjonijiet
- Marka
- Animal Factory Amplification
- Mudell
- Dirty Mirror
- Kategorija
- Effetti u pedali
Controls
- Footswitches
- 3
- Knobs
- 15
- Delay modulation
- Envelope follower or LFO
- Delay routing per fuzz
- Dry input, 100% wet delayed, or blend
Audio
- Effect type
- Dual parallel fuzz with delay
- Burn channel (left)
- Based on Chemical Burn circuit, a nastier FY-6 variant
- Churn channel (right)
- Based on a heavily modded Big Muff Pi
- Delay circuit
- Short delay before the fuzz circuits
- Fuzz mixing
- Parallel into a high-headroom output section
- Core circuit
- From the Coma Reactor Eurorack module
Power
- Power requirement
- 9-12V DC min. 250mA
Software
- Manual
- Dirty Mirror Manual available
- Media
- First look demo, official demo and video manual, unboxing video